Ramset Model 1000 UL Slide Gate Operator - 1/2 HP
From $1,570.00
To $3,643.00
Product Details
Electric Motor: 1/2 Hp, 115VAC, 4.5 amp, 50/60Hz, with high speed ball bearings and resettable overload button
Heavy Duty Worm Gear: Lubricated in an oil bath for smooth and quiet operation
Limit Switches: Mechanical adjustment for accurate gate stop settings
Cover: High-impact resistant charcoal gray polyethylene
Cover Dimensions: 27" H x 16" L x 16-1/2" W
Finish: Gold/Zinc plated to inhibit corrosion
Features
- Automatic close timer
- Pre-warning alarm relays
- Manual or self adjusting ERD
- Dual gate communication capability
- Secure close
- Anti-tailgating/One pass system
- Radio cycle (open, stop & close)
- Open & close delays
- Indicator lights for easy troubleshooting
- Plug in loop detectors
- Left/Right installation switch
- Optional Battery Backup System
- MADE IN USA
*Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 (photo eye) AND Type B2 (sensing edge) entrapment prevention devices must be installed or OPERATOR WILL NOT RUN.
Brand | Ramset |
---|
Showcased Accessories
- Residential Telephone Entry & Access Control Systems
- Stand-Alone Keypads
- Stand-Alone Card Readers / Keypads / Intercoms
- Expansion & Add-On Components
- Radio Remotes
- Emergency Access
- Radio Remote Accessories
- All Products
- Surge Suppressors & Protectors
- Chain & Chain Tensioners
- Magnetic Locks
- Loop Detectors
- Direct Burial / Pave-Over Loops
- Saw-Cut / Cut-In Loops
- Sensor Probes / Wands
- Loop Installation Tools & Supplies
- Retro-Reflective
- Through-Beam
- Safety Edges
-
15====
-
Ramset 800-02-06 Gear Reducer - Size 60 / 30:1RAM-800-02-06 800-02-06• Gear Reducer - Size 60, Ratio 30:1See More Details
• C-Face
• For 1000, 5500$362.00
15==== -
Ramset 800-04-00 Motor - 1/2 HP 120VAC / C-FaceRAM-800-04-00 800-04-00• Motor, C-Face - 120 VAC 1/2 HPSee More Details
• For 100, 1000$241.00
15==== -
Ramset 800-20-00 Limit SwitchRAM-800-20-00 800-20-00• Formerly 50-069See More Details
• Limit Switch$15.00
15==== -
Ramset 800-20-01 Limit SwitchRAM-800-20-01 800-20-01• Limit SwitchSee More Details
• For 1000, 5500$15.00
15==== -
Ramset 800-20-05 Limit SwitchRAM-800-20-05 800-20-05• Formerly 50-069See More Details
• Limit Switch 00-h3$15.00
15==== -
Ramset 800-20-20 Switch - Foot PedalRAM-800-20-20 800-20-20• Foot Pedal SwitchSee More Details
• For 100, 1000, 5500$15.00
15==== - 15====
-
Ramset 800-52-00 Drive Chain - #40RAM-800-52-00 800-52-00• #40 Drive ChainSee More Details
• 10 Foot Section$37.00
15==== - 15====
-
Ramset 800-60-01 Transformer - 120/240VAC to 20VACRAM-800-60-01 800-60-01• 120/240VAC TO 20VACSee More Details
• 20VA UL$54.00
15==== -
Ramset 800-63-00-INTL Intelligate Control Board - Pre 2016RAM-800-63-00-intl 800-63-00-INTL• Replacement Control Board for all Ramset Gate OperatorsSee More Details
• International pre UL325 / 2016$440.00
15==== -
Ramset 800-64-00 Edge Connector - 20 PinRAM-800-64-00 800-64-00• 20 Pin Edge ConnectorSee More Details$84.00
15====
-
Ramset 800-75-21 Clutch AssemblyRAM-800-75-21 800-75-21• Clutch AssemblySee More Details
• For 1000, 5500$144.00
15==== -
Ramset 800-75-31 Idler - UHMW / 3-1/2"RAM-800-75-31 800-75-31• 3-1/2" UHMW IdlerSee More Details
• Formerly 50-058$49.00
15==== -
Ramset 800-75-73 Limit Shaft AssemblyRAM-800-75-73 800-75-73• Limit Shaft AssemblySee More Details
• For 1000, 5500$121.00