Saw-Cut / Cut-In Loops

Saw-Cut / Cut-In Loops are typically used in existing concrete or asphalt driveways. They are installed by making a 1" deep slot cut in a rectangular shape using a diamond tipped blade on a circular saw. After inserting the loop into the saw cut the roadway will be resealed using the proper color of polyurethane loop sealant. The size of the loop being used is determined by the width of the roadway. Typically a traffic loop will be 4-6' shorter in width than the roadway itself eg: a 12' roadway would use a 8' wide induction loop. The shorter leg of the driveway loop is typically 4' or 6' long and will affect the detection height and stability of the induction loop. The lead length is the distance from the gate loop to the gate operator itself and is available from 20' up to 100' in length. Our most commonly sold size is 4'x8' with a 50' lead. We carry saw cut induction loops made by Torxun, Reno AE, BD Loops, EMX, DoorKing, LiftMaster, Eagle, Linear, and MMTC. You can use the filters to narrow down your selection based on size and lead length. If you need help with layout or loop sizing please give us a call at (888) 818-4283 or visit our Driveway Vehicle Detection - Loops & Loop Detectors section in our DIY Learning Center for detailed instructions and diagrams.