Loops

Vehicle Loops and Loop Detectors are used to detect the presence of a vehicle to open a gate, or as a safety device to prevent the gate from closing on a vehicle in its path. Inductance Loops are available as Direct Burial or Cut-In. In general, direct burial loops are placed below the surface prior to application of asphalt or concrete while cut-in loops are installed within a slot sawed into the existing surface. We have preformed loops available in both styles as well as loop wire if you prefer to make your own loops. We also sell a nice selection of tools and sealants to help with the installation and troubleshooting of traffic loops. The sensor probes/wands are another way to open your gate automatically when leaving the property, they are not as reliable as loop detectors but they are easier to install because they can be placed on the side of the roadway rather than in the center. Exit wands/probes should not be used as safety devices. Visit Our Driveway Vehicle Detection - Loops & Loop Detectors in our DIY Learning Center for detailed instructions and diagrams.