Nice HySecurity SWINGSMART-CNX Swing Gate Operator
• 12' x 1,300 Lbs / 20' x 600 Lbs
• 115/208/230VAC Power Source or 24VDC Solar
• 24VDC Operational Voltage
• Opens 90° ~ 10 to 15 Seconds
• 24VDC Battery Backup System w/ Two 8Ah Batteries
• Up To 300 Full Cycles on Battery Backup Operation
• Includes EMX IRB-MON Photo Eye
• 2-Year Limited Manufacturer Warranty
• 5-7 Business Day Lead Time
• MADE IN USA
From $2,757.00
To $4,112.00
SKU
HYS-swingsmart-cnx-bundle
| Brand | Nice HySecurity |
|---|
Showcased Accessories
-
EMX 2101 CS101 Carsense 101 Probe Vehicle Motion Detector - Detector & Probe
From $135.00
To $807.00
- Loop Detectors
- Direct Burial / Pave-Over Loops
- Saw-Cut / Cut-In Loops
- Sensor Probes / Wands
- Loop Installation Tools & Supplies
- Retro-Reflective
- Through-Beam
- Safety Edges
- Sensor Devices
- All Products
- Residential Telephone Entry & Access Control Systems
- Stand-Alone Keypads
- Stand-Alone Card Readers / Keypads / Intercoms
- Expansion & Add-On Components
- Radio Remotes
- Emergency Access
- Magnetic Locks
- Gate Operator Accessories
Product Manuals
Product Brochures
Additional Resources
-
23====
-
Nice HySecurity MX002008 Battery Kit - 8AhHYS-mx002008 MX002008• Two 12V, 8Ah batteriesSee More Details
• 2-3 Week Lead time$160.00
23==== -
Nice HySecurity MX3930 Taper Clamp AssemblyHYS-mx3930 MX3930• Taper clamp assemblySee More Details
• Includes male and female hubs plus all tightening hardware
• SwingSmart CNX
• 2-3 Week Lead time$241.00
23==== -
Nice HySecurity MX4004 Bracket - Sensor MountingHYS-mx4004 MX4004• Plastic bracket for sensor mounting and position adjustmentSee More Details
• SwingSmart CNX, (includes 1 set of 2)
• 2-3 Week Lead time$18.00
23==== -
Nice HySecurity MX4265 MagnetHYS-mx4265 MX4265• Plastic and magnet used to trip Open & Close sensorsSee More Details
• Mounts to taper clamp hub
• SwingSmart CNX 20
• 2-3 Week Lead time$56.00
23==== -
Nice HySecurity MX4285 Drive Board ControllerHYS-mx4285 MX4285• Drive board controller for brushless DC motorSee More Details
• 2-3 Week Lead time$649.00
23==== -
Nice HySecurity MX4329-03 Hall Effect Sensor w/ HarnessHYS-mx4329-03 MX4329-03• Hall effect sensor with harnessSee More Details
• For SwingSmart CNX
• 2-3 Week Lead time$87.00
23==== -
Nice HySecurity MX4330 Cable - Communication PortHYS-mx4330 MX4330• HySecurity communication port cableSee More Details
• Connects SmartCNX controller and drive board controllers and CNX controller to SmartCNX I/O Expansion board
• 2-3 Week Lead time$46.00
23==== -
Nice HySecurity MX4345 SmartCNX ControllerHYS-mx4345 MX4345• SmartCNX controller manages all operator functions and settings through a simple programmable interfaceSee More Details
• Features Bluetooth connection to S.T.A.R.T. CNX smartphone installer app, HyNet remote management technology, intelligent inputs that work with 10K or pulsed monitored sensors, and 32 character OLED display
• 2-3 Week Lead time$720.00
23==== -
Nice HySecurity MX4362 KeysHYS-mx4362 MX4362• Spare set of 2 keysSee More Details
• For SlideSmart CNX, SwingSmart CNX cover locks
• 2-3 Week Lead time$43.00
23==== -
Nice HySecurity MX4365 Top Cap w/ Lock & KeyHYS-mx4365 MX4365• Top cap, includes lock and keySee More Details
• SwingSmart CNX 20
• 2-3 Week Lead time$109.00
23==== -
Nice HySecurity MX4407 Motor - Brushless DCHYS-mx4407 MX4407• Brushless DC motorSee More Details
• SlideSmart CNX 15 and SwingSmart CNX 20
• 2-3 Week Lead time$796.00
23==== -
Nice HySecurity MX4438 Wrench - Flat Box EndHYS-mx4438 MX4438• Flat box end wrench tool for releasing/adjusting the taper clamp assemblySee More Details
• SwingSmart CNX 20
• 2-3 Week Lead time$63.00
23==== -
Nice HySecurity MX4460 Cover Assembly - RearHYS-mx4460 MX4460• Rear cover assemblySee More Details
• Includes side brackets and reset switch
• SwingSmart CNX
• 2-3 Week Lead time$380.00
23==== -
Nice HySecurity MX4465 Cover Assembly - FrontHYS-mx4465 MX4465• Front cover assembly for SlideSmart and SwingSmart CNX modelsSee More Details
• 2-3 Week Lead time$245.00
23==== -
Nice HySecurity MX4495 Fasteners - Rear CoverHYS-mx4495 MX4495• Fasteners for attaching the rear coverSee More Details
• All SlideSmart and SwingSmart CNX models
• 2-3 Week Lead time$16.00
23==== -
Nice HySecurity MX4535 Service Kit - Arm Hinge JointHYS-mx4535 MX4535• Service kit for rebuilding the arm hinge joint on universal gate arm (MX4005)See More Details
• 2-3 Week Lead time$41.00
23==== -
Nice HySecurity MX4613 Circuit Breaker w/ Panel MountHYS-mx4613 MX4613• 240VAC, 8A circuit breaker and panel mountSee More Details
• For SlideSmart CNX and SwingSmart CNX models
• 2-3 Week Lead time$17.00
23==== -
Nice HySecurity MX4615 Lock AssemblyHYS-mx4615 MX4615• Lock assemblySee More Details
• For front cover or top cap
• Includes two keys
• For SlideSmart CNX and SwingSmart CNX
• 2-3 Week Lead time$72.00
23==== -
Nice HySecurity MX4624 Gearbox w/ Gear OilHYS-mx4624 MX4624• Gearbox with low temperature gear oil for SwingSmart CNXSee More Details
• 2-3 Week Lead time$643.00
23==== -
Nice HySecurity MX4621 Hy5B™ 2.0 Loop DetectorHYS-mx4621 MX4621• Improved loop detector module with digital interface to SmartCNX and all other HySecurity controllersSee More Details
• Automatically sets sensitivity
• Automatically compensates for gate movement
• Advanced loop diagnostics
• Note: CNX operators not compatible with MX4125 vehicle detector
• 2-3 Week Lead time$237.00
23==== -
Nice HySecurity MX4005 Gate Arm AssemblyHYS-mx4005 MX4005• Next Gen universal gate arm assemblySee More Details
• Elliptical arms, no pinch covers required
• For left and right handing Swing gates
• 2-3 Week Lead time$340.00
23==== -
Nice HySecurity MX4409 Power SupplyHYS-mx4409 MX4409• Power supply, 36VDC output, switch selectable 120-230VAC inputSee More Details
• 2-3 Week Lead time$161.00
23==== -
Nice HySecurity MX4410 I/O Expansion Module KitHYS-mx4410 MX4410• Expansion board moduleSee More Details
• Provides 8 additional programmable relays and inputs
• Includes bracket, hardware and communication cable MX4330
• For Smart CNX operators
• 2-3 Week Lead time$695.00
Write Your Own Review