DoorKing 9210 Slide Gate Operator - #60 Chain
Choose Voltage & Phase
• 100' x 3,000 Lbs - 10' Minimum
• 115/208/230 VAC Power Source
• 115/208/230 VAC Operational Voltage
• Opens ~ 10 - 12" per Second
• Continuous Duty
• 5-Year Limited Manufacturer Warranty
• Additional Entrapment Prevention Devices REQUIRED
• MADE IN USA
• 3-5 Day Lead Time
From $4,744.00
To $30,367.15
SKU
DKS-9210-60-bundle
Product Details
DoorKing's Maximum Security operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only — such as industrial locations, loading docks, factories, airport security areas, sea ports, etc.; these operators must never be used in applications serving the general public. Because of the need to prioritize security in these applications, these operators are designed for fail-secure operation and require manual operation to open the gate in the event of a power outage. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications; center mounting the operator requires the pedestal mounting base (optional on 9210, 9220). To enhance security, these operators feature an anti-tailgating circuit and an adjustable partial open feature to help prevent unauthorized vehicle access. In addition, speed controller options (except 9210) allow the user to adjust the gate speed from 1/2 ft/sec up to 4 ft/sec. and provides slow-start and slow-stop funcitons as well. An Emergency Close feature is available on some models which will close the gate at 4 ft/sec. This assures your security gate is open the absolute minimum amount of time necessary.
*Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 (photo eye) and/or Type B2 (sensing edge) entrapment prevention devices must be installed or OPERATOR WILL NOT RUN.
Features
- Direct driven limit nuts
- Anti-tailgating feature
- Adjustable mid-stop
- Gate tracker reporting output
- Ports for plug-in loop detectors
- Two convenience outlets
- Fail-secure operation includes crank for manual operation
- Programming switches
- Built-in reset switch
- Built-in power On/Off switch
- Maximum gate length 100-feet
- Maximum gate weight 3000 Lb., #60 chain*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Set speed 1 Ft./second
- 40:1 gear reduction running in a continuous oil bath
- 1 HP continuous-duty motor
- 115, 208, 230 VAC single-phase, 208, 230 VAC three-phase
- Operator is shipped with chain brackets and 20-feet of #50 chain
- Class III and IV applications only
- ETL Listed
- Note: To be compliant with UL 325 and industry safety guidelines, additional Type B1 and/or Type B2 entrapment protection devices are required to be installed with this gate operator
- MADE IN USA
Options
- Heavy-duty pedestal mounting stand, 9210, 9220. (Recommended for gates over 30-feet to allow use of a chain support rail)
- Stop - Go traffic signal
- Plug-in loop detectors
- Heater kit for cold environments
- Surge suppressors
| Brand | Doorking |
|---|
Showcased Accessories
- Slide Gate Hardware
- Gate Locks
- Gate Operator Accessories
- Stand-Alone Access Control
- Multiple Unit / Access Point Control Systems
- Radio Remotes
- Push Buttons & Switches
- Access Control Accessories
- Loop Detectors
- Loops
- Photo Eyes
- Safety Edges
- Power Supplies
- Wire & Cable
- Gate Operator Replacement Parts
- All Products
- Google Feed
Product Manuals
Product Brochures
Additional Resources
-
118====
-
DoorKing 1200-010 Replacement BearingDKS-1200-010 1200-010• Replacement BearingSee More Details
• For 1200-009 Flange Bearing Hinge
• 3-5 Day Lead Time$79.50
118==== -
DoorKing 1200-028 OutletDKS-1200-028 1200-028• Outlet, Snap-InSee More Details
• 3-5 Day Lead Time$13.00
118==== -
DoorKing 1506-071 Entrapment Alarm BuzzerDKS-1506-071 1506-071• Tone GeneratorSee More Details
• 3-5 Day Lead Time$53.50
118==== -
DoorKing 1601-041 Toggle Switch - SPST 2 PosDKS-1601-041 1601-041• Toggle Switch - SPST 2 PositionSee More Details
• 3-5 Day Lead Time$20.75
118==== -
DoorKing 1601-140 Toggle Switch - 2 Pole On-OffDKS-1601-140 1601-140• Toggle Switch - 2 Pole On-OffSee More Details
• 3-5 Day Lead Time$34.25
118==== -
DoorKing 1601-141 Toggle Switch - 3 Pole On-OffDKS-1601-141 1601-141• Toggle Switch - 3 Pole On-OffSee More Details
• 3-5 Day Lead Time$66.75
118==== -
DoorKing 1601-256 Switch - Magnetic SensorDKS-1601-256 1601-256• Magnetic Sensor SwitchSee More Details
• 3-5 Day Lead Time$21.75
118==== -
$7.80
118==== -
DoorKing 1702-503 Cam - 1-1/4"DKS-1702-503 1702-503• Cam 1.1/4See More Details
• 3-5 Day Lead Time$7.80
118==== -
DoorKing 1702-509 Bracket - Lock CamDKS-1702-509 1702-509• Bracket - Lock CamSee More Details
• For 9200
• 3-5 Day Lead Time$32.00
118==== -
DoorKing 1702-515 Cam - OffsetDKS-1702-515 1702-515• Cam OffsetSee More Details
• 3-5 Day Lead Time$7.80
118==== -
DoorKing 1804-024 Switch - Micro NO NC CDKS-1804-024 1804-024• Micro Switch - NO NC CSee More Details
• 3-5 Day Lead Time$17.50
118==== -
DoorKing 1812-005 Switch Push ButtonDKS-1812-005 1812-005• Switch Push Button N.O.See More Details
• 3-5 Day Lead Time$36.00
118==== -
DoorKing 1897-052 Microphone Support GasketDKS-1897-052 1897-052• Gasket, Microphone SupportSee More Details
• 3-5 Day Lead Time$6.05
118==== -
DoorKing 2343-010 PCB Current SensorDKS-2343-010 2343-010• PCB Current SensorSee More Details
• 3-5 Day Lead Time$51.75
118==== -
DoorKing 2599-100 Warning SignDKS-2599-100 2599-100• Sign WarningSee More Details
• 3-5 Day Lead Time$23.00
118==== -
DoorKing 2600-032 Spirol Pin - 3/16" D x 1" L SSDKS-2600-032 2600-032• Spirol Pin - 3/16" D x 1" L SSSee More Details
• 3-5 Day Lead Time$8.80
118==== -
DoorKing 2600-096 Washer - SS 1.125" OD x .75" ID x .03"DKS-2600-096 2600-096• Washer - SS 1.125"ODx.75"IDx.03"See More Details
• 3-5 Day Lead Time$10.75
118==== -
DoorKing 2600-102 Motor CapacitorDKS-2600-102 2600-102• Replacement Motor CapacitorSee More Details
• For 6050 / 6100
• 3-5 Day Lead Time$77.00
118==== -
DoorKing 2600-193 Crank HandleDKS-2600-193 2600-193• Crank HandleSee More Details
• For 9200
• 3-5 Day Lead Time$58.50
118==== -
DoorKing 2600-199 Shaft - Limit CrossDKS-2600-199 2600-199• Shaft - Limit CrossSee More Details
• For 9200
• 3-5 Day Lead Time$32.75
118==== -
DoorKing 2600-214 Spring Clip - Crank HandleDKS-2600-214 2600-214• Spring Clip For Crank HandleSee More Details
• 3-5 Day Lead Time$16.50
118==== -
DoorKing 2600-234 Capacitor - 30uf 370VACDKS-2600-234 2600-234• Capacitor - 30uf 370VACSee More Details
• 3-5 Day Lead Time$71.25
118==== -
DoorKing 2600-239 Clamp - Capacitor VR6BDKS-2600-239 2600-239• Capacitor Clamp - VR6BSee More Details
• 3-5 Day Lead Time$12.50
118==== -
DoorKing 2600-241 Chain GuardDKS-2600-241 2600-241• Chain GuardSee More Details
• For 9200
• 3-5 Day Lead Time$37.75
118==== -
DoorKing 2600-254 Limit Nut - Bronze 1/2" w/ Magnet AssemblyDKS-2600-254 2600-254• Limit Nut - Bronze - 1/2" w/ Magnet AssemblySee More Details
• 3-5 Day Lead Time$41.50
118==== -
DoorKing 2600-259 Limit Nut - Bronze 1/2"DKS-2600-259 2600-259• Limit Nut - Bronze - 1/2"See More Details
• 3-5 Day Lead Time$33.50
118==== -
DoorKing 2600-278 Motor - 1 HP 115V 1P / CFce PSC 1725DKS-2600-278 2600-278• Motor - 1 HP 115V 1P / CFce PSC 1725See More Details
• 3-5 Day Lead Time$504.00
118==== -
DoorKing 2600-280 Motor - 1 HP 230V 1P / CFce PSC 1725DKS-2600-280 2600-280• Motor - 1 HP 230V 1P / CFce PSC 1725See More Details
• 3-5 Day Lead Time$557.00
118==== -
DoorKing 2600-295 Motor - 1 HP 208/230/460 3P / 1725DKS-2600-295 2600-295• Motor - 1 HP 208/230/460 3P / 1725See More Details
• Replaces 2600-300
• 3-5 Day Lead Time$693.00
118==== -
DoorKing 2600-309 Gear - Bevel - 15 Tooth / Bored 3/4"DKS-2600-309 2600-309• Gear - Bevel - 15 Tooth / Bored 3/4"See More Details
• 3-5 Day Lead Time$69.75
118==== -
DoorKing 2600-316 Sprocket - 19 Teeth 3/4" Bore #35DKS-2600-316 2600-316• Sprocket - 19 Teeth 3/4" Bore #35See More Details
• 3-5 Day Lead Time$22.25
118==== -
DoorKing 2600-317 Sprocket - 25 Teeth 1 1/4" Bore #35DKS-2600-317 2600-317• Sprocket - 25 Teeth 1 1/4" Bore #35See More Details
• 3-5 Day Lead Time$56.25
118==== -
DoorKing 2600-335 Idler BushingDKS-2600-335 2600-335• Idler BushingSee More Details
• For 9200
• 3-5 Day Lead Time$14.50
118==== -
DoorKing 2600-357 Sprocket Hub - 920 P1x1 1/4"DKS-2600-357 2600-357• Sprocket Hub - P1x1 1/4"See More Details
• For 920
• 3-5 Day Lead Time$74.75
118==== -
DoorKing 2600-394 Idler Wheel - UHMWDKS-2600-394 2600-394• Idler Wheel - UHMWSee More Details
• For 9200
• 3-5 Day Lead Time$32.75
118==== -
DoorKing 2600-395 Sprocket - H50P25 50 ChainDKS-2600-395 2600-395• Sprocket - H50P25 50 ChainSee More Details
• 3-5 Day Lead Time$129.75
118==== -
DoorKing 2600-414 Terminal - Block-2 PositionDKS-2600-414 2600-414• Terminal Block - 2 PositionSee More Details
• 3-5 Day Lead Time$14.00
118==== -
DoorKing 2600-439 Washer Cup - BrassDKS-2600-439 2600-439• Washer Cup - BrassSee More Details
• 3-5 Day Lead Time$8.60
118==== -
DoorKing 2600-440 Bearing - RearDKS-2600-440 2600-440• Bearing - RearSee More Details
• For 9150
• 3-5 Day Lead Time$32.25
118==== -
DoorKing 2600-454 Bearing Holder - FrontDKS-2600-454 2600-454• Bearing Holder - FrontSee More Details
• Plastic
• 3-5 Day Lead Time$15.50
118==== -
DoorKing 2600-525 Bracket - Crank Tube CoverDKS-2600-525 2600-525• Bracket - Crank Tube CoverSee More Details
• For 9200
• 3-5 Day Lead Time$136.25
118==== -
DoorKing 2600-526 Bracket - Cam StopDKS-2600-526 2600-526• Bracket - Cam StopSee More Details
• For 9200
• 3-5 Day Lead Time$33.25
118==== -
DoorKing 2600-527 Bracket - Limit SwitchDKS-2600-527 2600-527• Bracket - Limit SwitchSee More Details
• For 9200
• 3-5 Day Lead Time$46.25
118==== -
DoorKing 2600-533 Cover - SwitchDKS-2600-533 2600-533• Lockable Switch CoverSee More Details
• 3-5 Day Lead Time$46.75
118==== -
DoorKing 2600-570 Bracket - Crank Tube FrameDKS-2600-570 2600-570• Bracket - Crank Tube FrameSee More Details
• For 9200
• 3-5 Day Lead Time$130.50
118==== -
DoorKing 2600-571 Bracket - Crank Tube SupportDKS-2600-571 2600-571• Bracket - Crank Tube SupportSee More Details
• For 9200
• 3-5 Day Lead Time$64.75
118==== -
DoorKing 2600-572 Bracket - Crank TubeDKS-2600-572 2600-572• Bracket - Crank TubeSee More Details
• For 9200
• 3-5 Day Lead Time$32.75
118==== -
DoorKing 2600-729 Gasket - Hand CrankDKS-2600-729 2600-729• Gasket - Hand CrankSee More Details
• For 9200
• 3-5 Day Lead Time$17.75
118==== -
DoorKing 2600-731 Cover - Gasket SwitchDKS-2600-731 2600-731• Gasket Switch CoverSee More Details
• 3-5 Day Lead Time$6.25
118==== -
DoorKing 2600-732 Nameplate - Plastic DKSDKS-2600-732 2600-732• Nameplate - PlasticSee More Details
• 3-5 Day Lead Time$11.25
118==== -
DoorKing 2600-749 Wire Connector - STA-KON RC6DKS-2600-749 2600-749• Wire Connector - STA-KON RC6See More Details
• 3-5 Day Lead Time$6.55
118==== -
DoorKing 2600-810 Bushing - 7/8" Poke Thru FlapsDKS-2600-810 2600-810• Bushing - 7/8" Poke Thru FlapsSee More Details
• 3-5 Day Lead Time$4.45
118==== -
DoorKing 2600-857 Spring - Compression LimitsDKS-2600-857 2600-857• Spring - Compression LimitsSee More Details
• 3-5 Day Lead Time$4.70
118==== -
DoorKing 2600-875 Clamp - CapacitorDKS-2600-875 2600-875• Capacitor Mounting ClampSee More Details
• 3-5 Day Lead Time$12.25
118==== -
DoorKing 2600-880 Plug - 3/8" PlasticDKS-2600-880 2600-880• Plug - 3/8" PlasticSee More Details
• 3-5 Day Lead Time$4.70
118==== -
DoorKing 2600-909 Limit Shaft - ThreadedDKS-2600-909 2600-909• Shaft - Limit ThreadedSee More Details
• For 9200
• 3-5 Day Lead Time$103.25
118==== -
DoorKing 2600-920 BaseplateDKS-2600-920 2600-920• BaseplateSee More Details
• For 920
• 3-5 Day Lead Time$741.00
118==== -
DoorKing 2600-945 Cover - Plastic InsulatorDKS-2600-945 2600-945• Plastic Insulator CoverSee More Details
• 3-5 Day Lead Time$24.75
118==== -
DoorKing 2600-969 Bracket - Chain / Zinc PlatedDKS-2600-969 2600-969• Bracket - Chain / Zinc PlatedSee More Details
• For 920
• 3-5 Day Lead Time$43.25
118==== -
DoorKing 2601-101 Keyway - 1/4" x 1/4" x 1"DKS-2601-101 2601-101• Keyway - 1/4" x 1/4" x 1"See More Details
• 3-5 Day Lead Time$8.60
118==== -
DoorKing 2615-002 Bolt - Hex Head - 1/4 x 20 x 1/2DKS-2615-002 2615-002• Bolt - Hex HeadSee More Details
• 1/4 x 20 x 1/2
• 3-5 Day Lead Time$4.20
118==== -
DoorKing 2615-052 Bolt - Hex Head - 3/8-16 x 1DKS-2615-052 2615-052• Bolt - Hex HeadSee More Details
• 3/8-16 x 1
• 3-5 Day Lead Time$5.15
118==== -
DoorKing 2615-153 Bolt - Hex Head - 5/16-18 x 3/4DKS-2615-153 2615-153• Bolt - Hex HeadSee More Details
• 5/16-18 x 3/4
• 3-5 Day Lead Time$4.70
118==== -
DoorKing 2615-154 Bolt - Hex Head - 5/16-18 x 1DKS-2615-154 2615-154• Bolt - Hex HeadSee More Details
• 5/16-18 x 1
• 3-5 Day Lead Time$4.75
118==== -
DoorKing 2615-605 Bolt - Carriage - 10-32 x 1/2DKS-2615-605 2615-605• Bolt - CarriageSee More Details
• 10-32 x 1/2
• 3-5 Day Lead Time$7.05
118==== -
DoorKing 2615-625 Bolt - Carriage - 1/4-20 x 1/2DKS-2615-625 2615-625• Bolt - CarriageSee More Details
• 1/4-20 x 1/2
• 3-5 Day Lead Time$4.70
118==== -
DoorKing 2615-667 Bolt - Carriage - 3/8-16 x 3/4 Painted Stainless SteelDKS-2615-667 2615-667• Bolt - CarriageSee More Details
• 3/8-16 x 3/4
• Painted Stainless Steel
• 3-5 Day Lead Time$6.35
118==== -
DoorKing 2615-678 Bolt - Carriage - 3/8-16 x 1DKS-2615-678 2615-678• Bolt - CarriageSee More Details
• 3/8-16 x 1
• 3-5 Day Lead Time$5.60
118==== -
DoorKing 2615-681 Bolt - Carriage - 1/2-13 x 1DKS-2615-681 2615-681• Bolt - CarriageSee More Details
• 1/2-13 x 1
• 3-5 Day Lead Time$6.50
118==== -
DoorKing 2615-696 Bolt - Carriage - 1/2-13 x 4DKS-2615-696 2615-696• Bolt - CarriageSee More Details
• 1/2-13 x 4
• 3-5 Day Lead Time$6.85
118==== -
DoorKing 2616-000 Screw - Phillips Head - 6-32 x 1/4DKS-2616-000 2616-000• Screw - Phillips Head - 6-32 x 1/4See More Details
• 3-5 Day Lead Time$4.35
118==== -
DoorKing 2616-003 Screw - Phillips Head - 6-32 x 3/4DKS-2616-003 2616-003• Screw - Phillips Head - 6-32 x 3/4See More Details
• 3-5 Day Lead Time$4.50
118==== -
DoorKing 2616-017 Screw - Phillips Head - 8-32 x 3/8DKS-2616-017 2616-017• Screw - Phillips Head - 8-32 x 3/8See More Details
• 3-5 Day Lead Time$4.35
118==== -
DoorKing 2616-031 Screw - Flat Head - #0-90x1/4 SlotDKS-2616-031 2616-031• Screw - Flat Head - #0-90x1/4 SlotSee More Details
• 3-5 Day Lead Time$6.65
118==== -
Doorking 2616-032 Screw - Phillips Head - 1-72 SSDKS-2616-032 2616-032• Screw - Phillips Head - 1-72 SSSee More Details
• 3-5 Day Lead Time$4.65
118==== -
DoorKing 2616-052 Screw - Phillips Head - 10-32 x1/2DKS-2616-052 2616-052• Screw - Phillips Head - 10-32 x1/2See More Details
• 3-5 Day Lead Time$4.95
118==== -
DoorKing 2616-103 Screw - Pan Head - 4-40 x 5/8DKS-2616-103 2616-103• Screw - Pan Head - 4-40 5/8"See More Details
• 3-5 Day Lead Time$4.50
118==== -
DoorKing 2616-815 Stud - Fully Threaded - 3/4-10 x 6DKS-2616-815 2616-815• Stud - Fully ThreadedSee More Details
• 3/4-10 x 6
• 3-5 Day Lead Time$24.50
118==== -
DoorKing 2620-021 Washer - 1/2" SAEDKS-2620-021 2620-021• Washer - 1/2 " SAESee More Details
• 3-5 Day Lead Time$4.50
118==== -
DoorKing 2620-036 Washer - 1.483 ODx.813 IDx.116 TDKS-2620-036 2620-036• Washer - 1.483 ODx.813 IDx.116 TSee More Details
• 3-5 Day Lead Time$10.25
118==== -
DoorKing 2620-044 Lockwasher - #8DKS-2620-044 2620-044• Lockwasher - #8See More Details
• 3-5 Day Lead Time$3.60
118==== -
DoorKing 2620-047 Lockwasher - 3/8"DKS-2620-047 2620-047• Lockwasher - 3/8"See More Details
• 3-5 Day Lead Time$4.45
118==== -
DoorKing 2620-053 Lockwasher - 5/16"DKS-2620-053 2620-053• Lockwasher - 5/16"See More Details
• 3-5 Day Lead Time$4.35
118==== -
DoorKing 2620-109 Split Lockwasher - 1/4"DKS-2620-109 2620-109• Split Lockwasher - 1/4"See More Details
• 3-5 Day Lead Time$4.35
118==== -
DoorKing 2620-399 Nut - Hex - 00-90 Brass Zinc PlatedDKS-2620-399 2620-399• Nut - Hex - 00-90 Brass Zinc PlatedSee More Details
• 3-5 Day Lead Time$7.05
118==== -
DoorKing 2620-405 Nut - Hex - 3/8-16DKS-2620-405 2620-405• Nut - Hex - 3/8-16See More Details
• 3-5 Day Lead Time$4.50
118==== -
DoorKing 2620-409 Nut - Hex Flange Lock - 1/4-20DKS-2620-409 2620-409• Nut - Hex Flange Lock - 1/4-20See More Details
• 3-5 Day Lead Time$4.45
118==== -
DoorKing 2620-411 Nut - Hex Flange Lock - 5/16-18DKS-2620-411 2620-411• Nut - Hex Flange Lock - 5/16-18See More Details
• 3-5 Day Lead Time$4.75
118==== -
DoorKing 2620-420 Nut - Hex - 1/2-13DKS-2620-420 2620-420• Nut - Hex - 1/2-13See More Details
• 3-5 Day Lead Time$4.95
118==== -
DoorKing 2620-430 Nut - Hex - 3/4-10DKS-2620-430 2620-430• Nut - Hex - 3/4-10See More Details
• 3-5 Day Lead Time$6.10
118==== -
DoorKing 2802-003 Washer - #8 SAEDKS-2802-003 2802-003• Washer - #8 SAESee More Details
• 3-5 Day Lead Time$4.30
118==== -
DoorKing 2802-040 Clamp - Washer Push OnDKS-2802-040 2802-040• Washer Push on ClampSee More Details
• 3-5 Day Lead Time$5.45
118==== -
DoorKing 2902-003 Nut - Nylon Lock - 6-32DKS-2902-003 2902-003• Nut - Nylon Lock - 6-32See More Details
• 3-5 Day Lead Time$4.45
118==== -
DoorKing 2902-004 Nut - Nylon Lock - 8-32DKS-2902-004 2902-004• Nut - Nylon Lock - 8-32See More Details
• 3-5 Day Lead Time$4.50
118==== -
DoorKing 2902-006 Nut - Nylon Lock - 10-32DKS-2902-006 2902-006• Nut - Nylon Lock - 10-32See More Details
• 3-5 Day Lead Time$4.40
118==== -
DoorKing 2902-010 Nut - Nylon Lock - 8-32 GreenDKS-2902-010 2902-010• Nut - Nylon Lock - 8-32 GreenSee More Details
• 3-5 Day Lead Time$5.65
118==== -
DoorKing 3129-002 Cover - Terminal Block 2 PositionDKS-3129-002 3129-002• Terminal Block Cover - 2 PositionSee More Details
• 3-5 Day Lead Time$19.00
118==== -
DoorKing 3129-005 Cover - Terminal Block 5 PositionDKS-3129-005 3129-005• Terminal Block Cover - 5 PositionSee More Details
• 3-5 Day Lead Time$17.50
118==== -
DoorKing 4001-020 Terminal - 20 PinDKS-4001-020 4001-020• Terminal - 20 PinSee More Details
• 3-5 Day Lead Time$59.75
118==== -
DoorKing 4001-021 KeyDKS-4001-021 4001-021• Key - Polarizing Tyco 1437410-5See More Details
• 3-5 Day Lead Time$4.45
118==== -
DoorKing 4001-035 Lock & KeysDKS-4001-035 4001-035• Lock N16058BDxSFx2K Key 16120See More Details
• Includes Lock & 2 Keys
• 3-5 Day Lead Time$37.00
118==== -
DoorKing 4001-087 Transformer - 460/230/208 to 115 - SmallDKS-4001-087 4001-087• Transformer - 460/230/208-115See More Details
• Small
• 3-5 Day Lead Time$135.25
118==== -
DoorKing 9200-005 Cover - Plastic LimitsDKS-9200-005 9200-005• Cover - Plastic LimitsSee More Details
• 3-5 Day Lead Time$71.25
118==== -
DoorKing 9200-234 Bracket - High/Low Voltage SeparaterDKS-9200-234 9200-234• Bracket - High/Low Voltage SeparaterSee More Details
• 3-5 Day Lead Time$31.00
118==== -
DoorKing 9200-421 Chain - #35 / 21" 56 LinksDKS-9200-421 9200-421• Chain - #35 / 21" 56 LinksSee More Details
• 3-5 Day Lead Time$26.50
118==== -
DoorKing 9200-900 Mount Plate - PCB HingedDKS-9200-900 9200-900• Mount Plate - PCB HingedSee More Details
• For 9200
• 3-5 Day Lead Time$196.75
118==== -
DoorKing 9200-913 Control Board Mount PanelDKS-9200-913 9200-913• Control Board Mount PanelSee More Details
• For 9200
• 3-5 Day Lead Time$363.25
118==== -
DoorKing 9200-932 Solid State Relay - 1P SGDH2544RD3DKS-9200-932 9200-932• Solid State Relay - 1P SGDH2544RD3See More Details
• 3-5 Day Lead Time$132.00
118==== -
DoorKing 9200-933 Solid State Relay - 3PH SGR3053DDDKS-9200-933 9200-933• Solid State Relay - 3P SGR3053DDSee More Details
• 3-5 Day Lead Time$571.00
118==== -
DoorKing 9200-935 Cover - Solid State RelayDKS-9200-935 9200-935• Solid State Relay CoverSee More Details
• 3-5 Day Lead Time$53.75
118==== -
DoorKing 9210-006 Cover - PlasticDKS-9210-006 9210-006• Plastic CoverSee More Details
• 3-5 Day Lead Time$141.75
118==== -
DoorKing 9210-044 Wire HarnessDKS-9210-044 9210-044• Wire Harness - Subassembly SSRSee More Details
• For 9210
• 3-5 Day Lead Time$44.50
118==== -
DoorKing 9210-143 Wire SetDKS-9210-143 9210-143• Wire SetSee More Details
• For 9210 Single Phase
• 3-5 Day Lead Time$127.00
118==== -
DoorKing 9210-145 Wire SetDKS-9210-145 9210-145• Wire SetSee More Details
• For 9210 3 Phase
• 3-5 Day Lead Time$535.00
118==== -
DoorKing 9210-197 Resistor Assembly BleederDKS-9210-197 9210-197• Resistor Assembly Bleeder 22kSee More Details
• 3-5 Day Lead Time$20.50
118==== -
DoorKing 9210-303 Bracket - Partial Open LimitDKS-9210-303 9210-303• Bracket - Partial Open LimitSee More Details
• 3-5 Day Lead Time$31.00
118==== -
DoorKing 9240-927 Door - Stainless SteelDKS-9240-927 9240-927• Door - StainlessSee More Details
• For 9210
• 3-5 Day Lead Time$510.00
Write Your Own Review