• Stainless Steel
• Allows Surface Mounting of the Flush Style Housing
• Use with flush mount 1803, 1810, 1833, 1834, 1835 & 1837 80 Series Telephone Entry Systems
• Indoor use only
• NOTE: This accessory will not allow flush mounting of the unit
• 3-5 Day Lead TimeSee More Details
• Stainless Steel
• Required for Flush Mount Units
• Includes rough-in box and trim ring
• Use with flush mount 1803, 1810, 1833, 1834, 1835 & 1837 80 Series Telephone Entry Systems
• 3-5 Day Lead TimeSee More Details
• Expands the ":No Phone Line" telephone intercom interface on Access Plus systems from a single phone line up to 11 phone lines
• The system can be further expanded to interface with up to a maximum of 23 phone lines
• Only a single Access Plus controller can be used with the 1816AP intercom expansion module
• Ideally suited for apartment buildings, college resident halls, and office buildings
• Full-Duplex communication, built-in call waiting, double ring feature identifies visitor calls from regular incoming phone calls
• 3-5 Day Lead TimeSee More Details
• Weigand Output
• Provides voice communication to a single telephone station via the telephone network
• Requires a Central Office (C.O.) dedicated phone line connected to the 1838
• Distance between the Remote Call Station and the 1838 is limited to 500 feet
• Dimensions: 7.375"h x 11"w x 6.375"d
• 3-5 Day Lead TimeSee More Details
• Weigand Output
• Provides voice communication to a single telephone station via the telephone network
• Requires a Central Office (C.O.) dedicated phone line connected to the 1838
• Distance between the Remote Call Station and the 1838 is limited to 500 feet
• Dimensions: 7.375"h x 11"w x 6.375"d
• 3-5 Day Lead TimeSee More Details
• Required when the system expands beyond 5 1982-010 relay boards
• One decoder board is required for every 8 relay boards added after original 5 boards
• 3-5 Day Lead Time
• Circuit Boards are Non ReturnableSee More Details
• Elevator Control Board w/ Mounting Hardware
• For Use With Models 1833, 1835, 1837 & 1838
• Requires 16VAC Power Transformer - Included with Enclosures
• 2 Year Limited Manufacturer Warranty
• 3-5 Day Lead Time
• Circuit Boards are Non ReturnableSee More Details
• Small Enclosure for up to 2 Boards
• Lockable Enclosures for Housing Boards
• For Use With Models 1833, 1835, 1837 & 1838
• Requires 16VAC Power Transformer - Included with Enclosures
• Includes One 2348-010 Control Board
• Use 2348-040 to order additional boards
• 2 Year Limited Manufacturer Warranty
• 3-5 Day Lead Time
• Circuit Boards are Non ReturnableSee More Details
• Large Enclosure for up to 4 Boards
• Lockable Enclosures for Housing Boards
• For Use With Models 1833, 1835, 1837 & 1838
• Requires 16VAC Power Transformer - Included with Enclosures
• Includes One 2348-010 Control Board
• Use 2348-040 to order additional boards
• 2 Year Limited Manufacturer Warranty
• 3-5 Day Lead Time
• Circuit Boards are Non ReturnableSee More Details
• Wireless Wiegand Connector / 2.4 GHz
• Typical range is 500 feet line of sight
• Includes 1514-075 antenna kit and a vandal resistant dome antenna
• Optional repeaters for extended range (sold separately)
• NOT A STAND-ALONE DEVICE. MUST BE INSTALLED ON 1833, 1835, 1837, OR 1838
• MUST BE USED IN CONJUNCTION WITH 1489-080
• Use of DUAL BAND repeaters (2372-080) recommended
• 2 year Manufacturer Warranty
• 3-5 Day Lead TimeSee More Details
• Extends the range when a single 1489 kit is in use
• Housed in weather tight enclosure
• Includes 6-inch antenna and 12 VDC power supply
• 3-5 Day Lead TimeSee More Details
• Allows the 1802-EPD Telephone Entry System LCD display to maintain normal operation to approximately -20°F (-29°C)
• Includes a built-in thermostat that automatically turns the heater on when the temperature drops below 40°F (4°C)
• Also for use with 1812 flush mount units
• 3-5 Day Lead TimeSee More Details
• Telephone Entry Heater Kit
• Heater and thermostat come equipped with mounting magnets, no mounting hardware is required
• Thermostat turns heater on at approximately 40°F (4°C) and off at 55°F (12°C)
• 3-5 Day Lead TimeSee More Details
• Mounting Post Cap for Designer Style Mounting Post
• 4" x 8" steel stock
• 10" x 14" base plate
• In-ground adapter (DoorKing 1200-058) provides a mount for posts with base plates
• 3-5 Day Lead TimeSee More Details
@ Copyright 2021 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot