Nice Hysecurity STRONGARM-14F Barrier Gate Operator - 14'
From $11,530.00
To $138,534.00
Product Details
StrongArm 14F, 20, 28, 36 feature strong uni-body 10 gauge welded and zinc plated steel chassis with keyed T-lock protecting all electrical controls and parts. Arm will remain vertical when held open.
Fast model – StrongArm 14F speeds a 10 to 14 ft arm open to a full 90° in just 2 seconds. Operator comes standard with lightweight, oval, aluminum arm with lights and bumper and HyProtect™ breakaway arm bracket, plus a kill switch, which stops arm motion after vehicle strike.
DC Power Supply (UPS models only) The Uninterruptible DC Power Supply provides up to 300 cycles UPS backup after an AC power loss. Retain full functionality during an AC power outage using HySecurity's advanced DC Power Supply with HyCharger DC™, a powerful 50A three stage charger, custom built for continuous duty and long battery life. The DC Power Supply is a separate insulated and ventilated enclosure containing two sealed maintenance free AGM 110Ah, 12VDC batteries. Available in single phase only: Low voltage: 115V 50/60Hz (requires 30A branch circuit) or High voltage: 208-230V 50/60Hz (requires 15A branch circuit). Be certain to order the correct DC Power Supply voltage model as chargers are not field convertible.
Optional AC Power Supply with HyInverter™ AC provides UPS battery backup for 208-230VAC single-phase barrier arms, providing up to 300 cycles after an AC power loss.
The operator's normal duty cycle and the actual number of gate cycles available from battery depends upon gate resistance to travel, cycle length, battery size, state of charge, and health, ambient temperature, accessory power draw and frequency of gate cycles during power outage.
Wood arms up to 14 ft (4.3 m) maximum.
Specifications
- Arm Length: Up to 14'
- Full Open Angle: 90°
- Duty Cycle: 2,000 cycles/day
- Horsepower: 3/4hp
- Drive: Hydraulic
- Open/Close Time: 2s open/3s close
- Left or right
- Temperature Rating: -40° to 158° F
- 1 Phase Power: 115/208/230V 60Hz, 110/220 50Hz - 50Hz voltages are Special Order
- 3 Phase Power: 220/380V 50Hz, 208/230/460V 60Hz - 50Hz voltages are Special Order
- UPS 1 Phase Power Only: 115V 60/50Hz, 23A or 208/230V 60/50Hz, 11.5A - 50Hz voltages are Special Order
- Communication: RS-232, RS-485
- User Controls: Smart Touch Controller with 70+ configurable settings. Smart Touch keypad and display or a PC using S.T.A.R.T. software
- Relays: Three configurable user relays: one 30VDC, 3A solid state and two 250VAC, 10A electromechanical; Optional Hy8Relay™ for 8 additional relay outputs
- Finish: Zinc plated with yellow powder coating
- Listed to UL: Usage Class I, II, III, IV
- Warranty: 5 year
See Installed Options Brochure at the top of the Manuals & Brochure section for Installed Option Descriptions
| Brand | Nice HySecurity |
|---|
Showcased Accessories
- Loop Detectors
- Retro-Reflective
- Through-Beam
- Warning Devices
- All Products
- Radio Remotes
- Push Buttons
- Timers & Relays
- Barrier Gate Operator Accessories
-
92====
-
Nice HySecurity MX000033 Harness - Power Supply BoardHYS-mx000033 MX000033• Wiring harness from power supply board to Smart Touch ControllerSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$62.00
92==== -
Nice HySecurity MX000044 Harness - Buzzer & Reset / ConsoleHYS-mx000044 MX000044• Buzzer & Reset or Console Stop HarnessSee More Details
• StrongArm | SlideDriver
• 3-4 Week Lead Time
• No Additional Tariff Fees$33.00
92==== -
Nice HySecurity MX000046 Ribbon CableHYS-mx000046 MX000046• Ribbon cable, Smart Touch board to display boardSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$42.00
92==== -
Nice HySecurity MX000077 Cylinder KitHYS-mx000077 MX000077• Cylinder KitSee More Details
• HTG 316/320
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$801.00
92==== -
Nice HySecurity MX000169 Socket - Quick Disconnect / BrassHYS-mx000169 MX000169• 1/8" Socket Quick Disconnect Brass FittingSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$97.75
92==== -
Nice HySecurity MX000170 Fitting - Quick Disconnect / BrassHYS-mx000170 MX000170• 1/8" Plug Quick Disconnect Brass FittingSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$39.00
92==== -
Nice HySecurity MX000171 Valve - Endhead Main CheckHYS-mx000171 MX000171• Endhead Main Check Valve 8 GPMSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$131.50
92==== -
Nice HySecurity MX000172 Valve - 2 Position DirectionalHYS-mx000172 MX000172• 2 Position Directional ValveSee More Details
• All except pre-1996 EX, No coils
• StrongArm | SlideDriver | HydraLift
• 3-4 Week Lead Time
• No Additional Tariff Fees$192.75
92==== -
Nice HySecurity MX000184 Valve Coil - Large DirectionalHYS-mx000184 MX000184• 24VDC Directional Large Valve CoilSee More Details
• Spade terminal
• 3-4 Week Lead Time
• No Additional Tariff Fees$128.50
92==== -
Nice HySecurity MX000234 Valve - BrakingHYS-mx000234 MX000234• Braking ValveSee More Details
• StrongArm | HydraSwing
• 3-4 Week Lead Time
• No Additional Tariff Fees$331.75
92==== -
Nice HySecurity MX000296 T-Lock w/ KeysHYS-mx000296 MX000296• T-lock and keysSee More Details
• For StrongArm, SlideDriver, SlideSmart HD covers and WedgeSmart DC access doors
• Note: 2 lock units per WedgeSmart DC
• 3-4 Week Lead Time
• No Additional Tariff Fees$76.50
92==== -
Nice HySecurity MX000299 Limit CamHYS-mx000299 MX000299• Limit CamSee More Details
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$142.75
92==== -
Nice HySecurity MX000312 Pin - Cylinder / Stainless SteelHYS-mx000312 MX000312• StrongArm, Stainless Steel Cylinder PinSee More Details
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$64.00
92==== -
Nice HySecurity MX000346 Lithium Battery - 3VHYS-mx000346 MX000346• Controller Battery, 3 Volt, LithiumSee More Details
• For Smart Touch Controller / Smart Touch DC Controller
• For StrongArm | SlideDriver | SwingRiser
• 3-4 Week Lead Time
• No Additional Tariff Fees$8.50
92==== -
Nice HySecurity MX000369 Control Board - Power SupplyHYS-mx000369 MX000369• Power Supply Board, DC Operators, 3 AmpsSee More Details
• Smart Touch, DC power type
• For StrongArm | SlideDriver | SwingRiser
• 3-4 Week Lead Time
• No Additional Tariff Fees
• Circuit Boards are Non Returnable$294.75
92==== -
Nice HySecurity MX000485 Motor ContactorHYS-mx000485 MX000485• Motor ContactorSee More Details
• Note: Common to all SmartTouch operators. Must also purchase matching overload for relay operators
• 3-4 Week Lead Time
• No Additional Tariff Fees$317.25
92==== -
Nice HySecurity MX000486 TransformerHYS-mx000486 MX000486• 24VAC Output, 75 VA, 60Hz TransformerSee More Details
• Primary 115V, 208V, 230V, 480V, all 60Hz except 575 VAC
• 3-4 Week Lead Time
• No Additional Tariff Fees$131.75
92==== -
Nice HySecurity MX000487 Control Board - Power SupplyHYS-mx000487 MX000487• Board Power Supply, AC Operators, 3 AmpsSee More Details
• Smart Touch, AC Power Type
• 3-4 Week Lead Time
• No Additional Tariff Fees
• Circuit Boards are Non Returnable$242.00
92==== -
Nice HySecurity MX000585-0 Control BoardHYS-mx000585-0 MX000585-0• Smart Touch Controller board, Universal ProgrammingSee More Details
• Note: Program operator type and input power type when installing in operator
• 3-4 Week Lead Time
• No Additional Tariff Fees
• Circuit Boards are Non Returnable$872.00
92==== -
Nice Hysecurity MX000585R-0 Control BoardHYS-mx000585r-0 MX000585R-0• Reconditioned Smart Touch Controller board, Universal ProgrammingSee More Details
• Note: Program operator type and input power type when installing in operator
• Reconditioned parts carry the same warranty as new replacement parts
• 3-4 Week Lead Time
• No Additional Tariff Fees
• Circuit Boards are Non Returnable$610.00
92==== -
Nice HySecurity MX000658 Valve - ReliefHYS-mx000658 MX000658• 1500PSI Relief ValveSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$220.25
92==== -
Nice HySecurity MX000686 Cap - Standard Breather / 3/8"HYS-mx000686 MX000686• 3/8 Standard Breather CapSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$23.25
92==== -
Nice HySecurity MX000715 Switch - 3-Pole DisconnectHYS-mx000715 MX000715• 3-Pole Disconnect SwitchSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$62.00
92==== -
Nice HySecurity MX000844 Switch - Power Supply On/OffHYS-mx000844 MX000844• DC Power Supply On/Off SwitchSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$178.50
92==== -
Nice HySecurity MX000877 Battery - 12V / 110AhHYS-mx000877 MX000877• Battery, 12V 110AH AGMSee More Details
• Sealed, Maintenance free
• 3-4 Week Lead Time
• No Additional Tariff Fees$858.00
92==== -
Nice HySecurity MX000910 Heater Strip - 115VACHYS-mx000910 MX000910• 115VAC Heater Strip OnlySee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$128.75
92==== -
Nice HySecurity MX000911 Heater Strip - 230VACHYS-mx000911 MX000911• 230VAC Heater Strip OnlySee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$132.50
92==== -
Nice HySecurity MX000970 Hydraulic Fluid - 1 GallonHYS-mx000970 MX000970• Hydraulic FluidSee More Details
• 1 Gallon Uniflow
• 3-4 Week Lead Time
• No Additional Tariff Fees$111.75
92==== -
Nice HySecurity MX001001 Barrier Arm - Aluminum - Rectangular / 10'HYS-mx001001 MX001001• Aluminum 10' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 10'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$361.50
92==== -
Nice HySecurity MX001002 Barrier Arm - Aluminum - Rectangular / 12'HYS-mx001002 MX001002• Aluminum 12' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 12'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$436.75
92==== -
Nice HySecurity MX001003 Barrier Arm - Aluminum - Rectangular / 14'HYS-mx001003 MX001003• Aluminum 14' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 14'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$510.00
92==== -
Nice HySecurity MX001004 Barrier Arm - Aluminum - Rectangular / 16'HYS-mx001004 MX001004• Aluminum 16' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 16'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$587.00
92==== -
Nice HySecurity MX001005 Barrier Arm - Aluminum - Rectangular / 18'HYS-mx001005 MX001005• Aluminum 18' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 18'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$633.00
92==== -
Nice HySecurity MX001006 Barrier Arm - Aluminum - Rectangular / 20'HYS-mx001006 MX001006• Aluminum 20' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 20'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$704.00
92==== -
Nice HySecurity MX001007 Barrier Arm - Aluminum - Rectangular / 22'HYS-mx001007 MX001007• Aluminum 22' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 22'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$777.00
92==== -
Nice HySecurity MX001008 Barrier Arm - Aluminum - Rectangular / 24'HYS-mx001008 MX001008• Aluminum 24' Replacement Barrier ArmSee More Details
• Rectangular
• 2" x 5" x 24'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$848.00
92==== -
Nice HySecurity MX001038 Barrier Arm - Fiberglass / 10'HYS-mx001038 MX001038• Fiberglass 10' Replacement Barrier ArmSee More Details
• 1-3/4" x 4-1/2" x 10'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$459.75
92==== -
Nice HySecurity MX001039 Barrier Arm - Fiberglass / 12'HYS-mx001039 MX001039• Fiberglass 12' Replacement Barrier ArmSee More Details
• 1-3/4" x 4-1/2" x 12'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$665.00
92==== -
Nice HySecurity MX001040 Barrier Arm - Fiberglass / 14'HYS-mx001040 MX001040• Fiberglass 14' Replacement Barrier ArmSee More Details
• 1-3/4" x 4-1/2" x14'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$873.00
92==== -
Nice HySecurity MX001041 Barrier Arm - Fiberglass / 16'HYS-mx001041 MX001041• Fiberglass 16' Replacement Barrier ArmSee More Details
• 1-3/4" x 4-1/2" x16'
• Mounting hardware NOT included
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$871.00
92==== -
Nice HySecurity MX001043 Bracket & Clamps - Fiberglass Barrier Arms / Side MountHYS-mx001043 MX001043• Bracket w/ Clamps for fiberglass side mount barrier arms - 1-3/4" x 4-3/4"See More Details
• Mounts either left or right
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$533.00
92==== -
Nice HySecurity MX001046 Bracket & Yoke - Aluminum & Fiberglass Arms w/ CounterweightsHYS-mx001046 MX001046• Mounting brackets and yoke for long aluminum or fiberglass armsSee More Details
• These brackets have attachments to mount counterweight
• Note: For arms 30 ft and longer, add MX001237 cable tensioner and arm stabilizer
• Add counterweights for arms 20 ft and longer
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$2,670.00
92==== -
Nice HySecurity MX001090 Bracket & Clamps - Aluminum Barrier Arms / Side MountHYS-mx001090 MX001090• Bracket w/ Clamps for aluminum side mount barrier arms - 2" x 5"See More Details
• Mounts either left or right
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$567.00
92==== -
Nice HySecurity MX001092 Capacitor - MotorHYS-mx001092 MX001092• Capacitor for dual capacitor Baldor motorsSee More Details
• 3/4 hp, 1 hp, 2 hp, 216-259 MFD, 250V
• 3-4 Week Lead Time
• No Additional Tariff Fees$86.50
92==== -
Nice HySecurity MX001093 Capacitor - MotorHYS-mx001093 MX001093• Capacitor for single capacitor older motorsSee More Details
• 1 hp, 2 hp, 645-774 MFD, 125V
• 3-4 Week Lead Time
• No Additional Tariff Fees$159.50
92==== -
Nice HySecurity MX001100 Shaft - Crank w/ Bearing & ZerkHYS-mx001100 MX001100• Crank Shaft, Crank Bearing & ZerkSee More Details
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$492.25
92==== -
Nice HySecurity MX001110 Heater Kit - 208/230VACHYS-mx001110 MX001110• 208/230VAC Heater KitSee More Details
• With thermostat
• 3-4 Week Lead Time
• No Additional Tariff Fees$549.00
92==== -
Nice HySecurity MX001119 Lock KitHYS-mx001119 MX001119• Complete T-lock assemblySee More Details
• Includes lock cam, strike plate, and mounting hardware
&bul; For StrongArm cover
• 3-4 Week Lead Time
• No Additional Tariff Fees$101.00
92==== -
Nice HySecurity MX001120 KeyHYS-mx001120 MX001120• Key for #4260-6T LockSee More Details
• StrongArm | SlideDriver II | SlideDriver
• 3-4 Week Lead Time
• No Additional Tariff Fees$32.50
92==== -
Nice HySecurity MX001179 Antenna and Coax CableHYS-mx001179 MX001179• Radio Antenna and Coax CableSee More Details
• For single and dual channel receivers
• 3-4 Week Lead Time
• No Additional Tariff Fees$61.25
92==== -
Nice HySecurity MX001193 Heater Kit - 460VACHYS-mx001193 MX001193• 460VAC Heater KitSee More Details
• Includes relay contact and thermostat
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$436.00
92==== -
Nice HySecurity MX001197 Flashing Light KitHYS-mx001197 MX001197• Kit includes additional flashing light to attach to MX3426, 4 inch diameter lens, mounting hardware and wiringSee More Details
• Note: Limit four flashing lights per barrier arm
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$354.25
92==== -
Nice HySecurity MX001249 TransformerHYS-mx001249 MX001249• 24VAC Output, 75 VA, 50/60Hz TransformerSee More Details
• Primary 120V, 277V, 380V, 575V, all 50Hz and 575 VAC 60Hz
• 3-4 Week Lead Time
• No Additional Tariff Fees$239.50
92==== -
Nice HySecurity MX001270 Terminal Block - 5 PoleHYS-mx001270 MX001270• 5-Pole Terminal Block for DC Power SupplySee More Details
• Control wiring terminal
• 3-4 Week Lead Time
• No Additional Tariff Fees$40.00
92==== -
Nice HySecurity MX001386 Hose KitHYS-mx001386 MX001386• Hydraulic hose kitSee More Details
• 30, 38 inch
• Includes 2 quick disconnect sockets
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$308.50
92==== -
Nice HySecurity MX001633R Motor - ReconditionedHYS-mx001633r MX001633R• 60Hz, 3/4 hp, 1Ø, 3450 RPM, ReconditionedSee More Details
• Includes 2 single use packets of Loctite®
• To be used in place of MX001633 or MX001910
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$346.25
92==== -
Nice HySecurity MX001634 MotorHYS-mx001634 MX001634• Electric Motor 60Hz, 3/4 HP, 208/230/460VAC 3Ø, 3450 RPMSee More Details
• Includes 2 single packets of Loctite®
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$995.00
92==== -
Nice HySecurity MX001646 MotorHYS-mx001646 MX001646• Electric Motor, 24VDC, 3/4 HP, 1800RPMSee More Details
• Includes 2 single use packets of Loctite®
• StrongArm | SwingRiser 19 / 30
• 3-4 Week Lead Time
• No Additional Tariff Fees$1,295.00
92==== -
Nice HySecurity MX001650 Coupler - Shaft MotorHYS-mx001650 MX001650• 5/8" Shaft Motor CouplerSee More Details
• Electric Motor to Pump
• Includes motor shaft key, 2 single use packets of Loctite®
• 3-4 Week Lead Time
• No Additional Tariff Fees$301.25
92==== -
Nice HySecurity MX001730 Hose Assembly KitHYS-mx001730 MX001730• Hose assembly kit to convert face up (old style) AWOG to face down (new style) AWOGSee More Details
• StrongArm | SlideDriver | HydraLift
• 3-4 Week Lead Time
• No Additional Tariff Fees$606.00
92==== -
Nice HySecurity MX001777 Limit SwitchHYS-mx001777 MX001777• Limit switchSee More Details
• For StrongArm and SwingSmart DC
• Also used with manual override hand wheel on WedgeSmart DC
• 3-4 Week Lead Time
• No Additional Tariff Fees$36.00
92==== -
Nice HySecurity MX001872 Limit Switch KitHYS-mx001872 MX001872• Limit switch kit includes 2 limit switches, mounting bracket and hardwareSee More Details
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$142.75
92==== -
Nice HySecurity MX001875 ThermostatHYS-mx001875 MX001875• Thermostat for heater, on at 40° FSee More Details
• Includes bracket
• 3-4 Week Lead Time
• No Additional Tariff Fees$64.00
92==== -
Nice HySecurity MX001887 Seal Kit - Braking ManifoldHYS-mx001887 MX001887• Braking manifold seal kit, 4 o-ringsSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$32.50
92==== -
Nice HySecurity MX001910 MotorHYS-mx001910 MX001910• DC electric motor, 3/4 hp 24VDC, 1800RPMSee More Details
• Includes single use packet of Loctite®
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$1,160.00
92==== -
Nice HySecurity MX001951 Pump PackHYS-mx001951 MX001951• Pump Pack, 2.5 GPM, 60Hz, includes motor couplerSee More Details
• For StrongArm 14F
• 3-4 Week Lead Time
• No Additional Tariff Fees$2,795.00
92==== -
Nice HySecurity MX002054 CouplerHYS-mx002054 MX002054• Coupler, electric motor-to-pump, 5/8" x 6T splineSee More Details
• For all hydraulic operators manufactured after 5/31/2009
• Includes motor shaft key, 2 single use packets of Loctite®
• 3-4 Week Lead Time
• No Additional Tariff Fees$106.25
92==== -
Nice HySecurity MX002227 Piezo BuzzerHYS-mx002227 MX002227• Piezo Buzzer, "warn before operate", includes wire harnessSee More Details
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$67.50
92==== -
Nice HySecurity MX002467 Anchors & Hydraulic Cylinder Mount AdjustHYS-mx002467 MX002467• Anchors and adjusts hydraulic cylinder to mount, 1 inchSee More Details
• Includes eyebolt, 2 nuts and 2 Nord-Lock washers
• Note: For use in StrongArm models manufactured after 03/25/2011
• 3-4 Week Lead Time
• No Additional Tariff Fees$187.75
92==== -
Nice HySecurity MX002653 KnobHYS-mx002653 MX002653• Knob for HyProtect™ breakaway bracket arm coverSee More Details
• 1.25 inch diam x 1/4 - 20 stud
• For StrongArmPark DC | StrongArm 14F
• 3-4 Week Lead Time
• No Additional Tariff Fees$7.85
92==== -
Nice HySecurity MX002915 Fan - 208/230VACHYS-mx002915 MX002915• Fan for 208/230VAC HyCharger systemsSee More Details
• 65CFM
•120 X 25 mm
• 3-4 Week Lead Time
• No Additional Tariff Fees$131.25
92==== -
Nice HySecurity MX2890-01 Retrofit Kit - HyCharger DCHYS-mx2890-01 MX2890-01• Retrofit kit to upgrade older battery chargers to HyCharger DCSee More Details
• 208/230VAC, 25A
• Note: For DC operators purchased prior to January 6, 2014
• 3-4 Week Lead Time
• No Additional Tariff Fees$2,475.00
92==== -
Nice HySecurity MX2890-02 Retrofit Kit - HyCharger DCHYS-mx2890-02 MX2890-02• Retrofit kit to upgrade older battery chargers to HyCharger DCSee More Details
• 115VAC, 25A
• Note: For DC operators purchased prior to January 6, 2014
• 3-4 Week Lead Time
• No Additional Tariff Fees$2,480.00
92==== -
Nice HySecurity MX3126 Cover Kit - Breakaway BracketHYS-mx3126 MX3126• HyProtect™ breakaway bracket cover kitSee More Details
• Includes rotomolded arm cover and attachment knob
• For StrongArm 14
• 3-4 Week Lead Time
• No Additional Tariff Fees$104.50
92==== -
Nice HySecurity MX3186-01 Label - WarningHYS-mx3186-01 MX3186-01• StrongArm warning labelSee More Details
• Located on barrier extrusion
• 3" X 6.381"
• 3-4 Week Lead Time
• No Additional Tariff Fees$10.25
92==== -
Nice HySecurity MX3307-02 Hy8Relay™ Relay ModuleHYS-mx3307-02 MX3307-02• Extended Hy8Relay™ relay module provides 8 additional programmable relay outputs for Smart Touch operatorsSee More Details
• 3-4 Week Lead Time
• No Additional Tariff Fees$660.00
92==== -
Nice HySecurity MX3311-01 Heater - 115VACHYS-mx3311-01 MX3311-01• Heater for DC Power SupplySee More Details
• 115VAC
• 3-4 Week Lead Time
• No Additional Tariff Fees$331.50
92==== -
Nice HySecurity MX3311-02 Heater - 208/230VACHYS-mx3311-02 MX3311-02• Heater for DC Power SupplySee More Details
• 208-230VAC
• 3-4 Week Lead Time
• No Additional Tariff Fees$312.50
92==== -
Nice HySecurity MX3356 Display BoardHYS-mx3356 MX3356• OLED display board for operators with a 32 character display opening of 2-3/4 x 3/4 inchSee More Details
• Retrofit kit MX3542 required for retrofitting older display boards
• 3-4 Week Lead Time
• No Additional Tariff Fees
• Circuit Boards are Non Returnable$162.75
92==== -
Nice HySecurity MX3399 Smart Touch Controller KeypadHYS-mx3399 MX3399• 5 button Smart Touch Controller keypad with 2 LED indicatorsSee More Details
• Only compatible with OLED display boards
• Retrofit kit MX3542 required forretrofitting older keypads
• 3-4 Week Lead Time
• No Additional Tariff Fees$104.50
92==== -
Nice Hysecurity MX3402 Start SwitchHYS-mx3402 MX3402• Start SwitchSee More Details
• CV40-12 1/2 HP 60H
• 3-4 Week Lead Time
• No Additional Tariff Fees$254.50
92==== -
Nice HySecurity MX3425 Bulb - LEDHYS-mx3425 MX3425• LED Light Bulb for Flashing Light KitSee More Details
• 24VAC/DC
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$34.00
92==== -
Nice HySecurity MX3426 Light Kit - Flashing LEDHYS-mx3426 MX3426• LED Flashing light kit for armSee More Details
• 4" diameter lens
• 24VDC
• Includes one light
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$383.00
92==== -
Nice HySecurity MX3542 Retrofit Kit - LED KeypadHYS-mx3542 MX3542• Retrofit kit required for retrofitting new LED keypad (MX3399) and OLED display board (MX3356) in operators with old style display boardand keypadSee More Details
• Kit includes display and keypad
• 3-4 Week Lead Time
• No Additional Tariff Fees$263.75
92==== -
Nice HySecurity MX3753 Switch Kit - Motor StartHYS-mx3753 MX3753• Electric motor start switch kitSee More Details
• Includes one 3/4 hp start switch and 1 gasket
• For StrongArm
• 3-4 Week Lead Time
• No Additional Tariff Fees$221.25
92==== -
Nice HySecurity MX3827 Bracket - Breakaway ArmHYS-mx3827 MX3827• HyProtect™ breakaway arm bracket with kill switch and harnessSee More Details
• Kill switch prevents barrier arm operation after arm strike
• For StrongArm 14F Only
• Fits with MX3579-14 or MX4182-14 or shorter arms
• 3-4 Week Lead Time
• No Additional Tariff Fees$500.00
92==== -
Nice HySecurity MX4057 Harness - LED Arm Lights & Kill SwitchHYS-mx4057 MX4057• Flexible wire harness connects to the LED arm lights and kill switchSee More Details
• For use on WedgeSmart DC and StrongArm 14F operators with killswitch, built after 4/15/2017.
• 3-4 Week Lead Time
• No Additional Tariff Fees$162.75
92==== -
Nice Hysecurity MX4138 Cable - Smart Touch ControllerHYS-mx4138 MX4138• Download cable with USB to RS-232 adapter - 6'See More Details
• Connects laptop to Smart Touch Controller
• Use with Smart Touch Analyze and Retrieve Tool (S.T.A.R.T.)
• 3-4 Week Lead Time
• No Additional Tariff Fees$121.75
92==== -
Nice HySecurity MX4182-10 Oval Aluminum Arm - 10'HYS-mx4182-10 MX4182-10• Arm Assembly, Aluminum, Oval, 10 ftSee More Details
• For operators with kill switch built after June 2017
• Includes LED light strip with UV stabilized cover and bumper
• For StrongArmPark DC | StrongArm 14F | Wedgesmart
• Note: Mounting bracket and harness not included
• 3-4 Week Lead Time
• No Additional Tariff Fees$420.75
92==== -
Nice HySecurity MX4182-12 Oval Aluminum Arm - 12'HYS-mx4182-12 MX4182-12• Arm Assembly, Aluminum, Oval, 12 ftSee More Details
• For operators with kill switch built after June 2017
• Includes LED light strip with UV stabilized cover and bumper
• For StrongArmPark DC | StrongArm 14F
• Note: Mounting bracket and harness not included
• 3-4 Week Lead Time
• No Additional Tariff Fees$476.50
92==== -
Nice HySecurity MX4182-14 Oval Aluminum Arm - 14'HYS-mx4182-14 MX4182-14• Arm Assembly, Aluminum, Oval, 14 ftSee More Details
• For operators with kill switch built after June 2017
• Includes LED light strip with UV stabilized cover and bumper
• For StrongArmPark DC | StrongArm 14F
• Note: Mounting bracket and harness not included
• 3-4 Week Lead Time
• No Additional Tariff Fees$508.00
92==== -
Nice HySecurity MX4402 Kill Switch KitHYS-mx4402 MX4402• Kill switch sensorSee More Details
• For StrongArmPark DC | StrongArm 14F
• 3-4 Week Lead Time
• No Additional Tariff Fees$32.00