• 1-1/4" x 9' 10"
• Galvanized steel U-channel
• For side mounted guide rollers
• For arched or decoratively topped gates
• There is a 20% Restock Fee on all productsSee More Details
• 4' 11" gear rack w/ mounting screws
• 15mm x 15mm
• Mounts inside track
• Completely hides drive system
• No exposed hardware - complete protection
• For CGS-500.8M
• There is a 20% Restock Fee on all productsSee More Details
• Bottom end cup
• Holds gate steady
• Prolongs life of carriages and gate operators
• For CGS-350.5XL
• There is a 20% Restock Fee on all productsSee More Details
• 4' 11" gear rack w/ mounting screws
• 22mm x 225mm
• Mounts inside track
• Completely hides drive system
• No exposed hardware - complete protection
• For CGS-500.8P
• There is a 20% Restock Fee on all productsSee More Details
• 1-1/4" x 19' 8"
• Galvanized steel U-channel
• For side mounted guide rollers
• For arched or decoratively topped gates
• There is a 20% Restock Fee on all productsSee More Details
• 4' 11" gear rack w/ mounting screws
• 30mm x 30mm
• Mounts inside track
• Completely hides drive system
• No exposed hardware - complete protection
• For CGS-500.8G
• There is a 20% Restock Fee on all productsSee More Details
• End wheel for UL325 compliance
• Bolts into each end of track
• Prevents dirt, snow, etc. from getting inside track
• For CGS-350.5XL
• There is a 20% Restock Fee on all productsSee More Details
• Gear rack centering device
• Installation tool to center and align gear rack in track
• Aligns teeth and acts as drilling jig
• Set of 2 pieces
• For CGS-500.8M
• There is a 20% Restock Fee on all productsSee More Details
• Gear rack centering device
• Installation tool to center and align gear rack in track
• Aligns teeth and acts as drilling jig
• Set of 2 pieces
• For CGS-500.8P
• There is a 20% Restock Fee on all productsSee More Details
• Gear rack centering device
• Installation tool to center and align gear rack in track
• Aligns teeth and acts as drilling jig
• Set of 2 pieces
• For CGS-500.8G
• There is a 20% Restock Fee on all productsSee More Details
• Lane Opening Width of 8 Ft. 9 In.
• For FAAC B614
• Includes Lights, Connector Kit and Assembly to Barrier Arm
• 3-5 Day Lead Time
• Restock Fee May Apply to Returned ProductsSee More Details
• Lane Opening Width of 7 Ft. 1 In.
• For FAAC B614
• Includes Lights, Connector Kit and Assembly to Barrier Arm
• 3-5 Day Lead Time
• Restock Fee May Apply to Returned ProductsSee More Details
• Lane Opening Width of 12 Ft.
• For FAAC B614
• Includes Lights, Connector Kit and Assembly to Barrier Arm
• 3-5 Day Lead Time
• Restock Fee May Apply to Returned ProductsSee More Details
Choose Black or Silver
• 180° hydraulic gate closer
• Adjustable speed and final snap
• Compact & aesthetic design
• Scratch resistant and corrosion free anodized aluminium housing
• Direct assembly on 180° hinges M16 & M20 (GBMU & GBMU4D)
• Bearing eyebolt is recommended (1034ROLL-M16)
• For left & right turning gates
• There is a 10% Restocking Fee on All Products
• 3 Day Lead Time
• No Additional Tariff FeesSee More Details
• Self-closing up to 125°
• Adjustable closing speed and final snap
• Powder coated aluminium housing
• Vandal-proof
• For left & right turning gates
• Secure, fast and easy attachment thanks to Quick-Fix mounting bolts
• Recommended with Gatestop
• There is a 10% Restocking Fee on All Products
• 3 Day Lead Time
• No Additional Tariff FeesSee More Details
• For gates up to 1,100 lbs (500 kg)
• Firmly fixed thanks to patented Quick-Fix system
• Stainless steel cable rated at 3,300 lbs (1500 kg) in case of hinge failure
• 11-13/16" long x 13/16" thick w/ 3/64" (1 mm) protective transparent sleeve (300 mm x 5mm)
• In accordance with EN 12604
• Easy installation guaranteed
• There is a 10% Restocking Fee on All Products
• 3 Day Lead Time
• No Additional Tariff FeesSee More Details
• Sophisticated protection from everyday wear and tear
• Tamper-proof design eliminates installer callbacks
• Secure photoeyes with or without their protective hoods
• Quick and easy 8 screw assembly of two pieces
• 11 gauge (.120") steel construction
• Accommodates wire run from the bottom or side
• MADE IN USASee More Details
• Distinguish between vehicles and pedestrians
• Two configurable relay outputs
• Adjustable sensitivity and cross traffic suppression
• 8-23 ft (2.5-7 m) mounting height
• Optional remote control for easy programming See More Details
@ Copyright 2021 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot
Comunello CG-50M Gear Rack - SmallGD# COM-cg-50m MFR# CG-50M• 4' 11" gear rack w/ mounting screws
Comunello CG-50P Gear Rack - MediumGD# COM-cg-50p MFR# CG-50P• 4' 11" gear rack w/ mounting screws
Comunello CG-50G Gear Rack - LargeGD# COM-cg-50g MFR# CG-50G• 4' 11" gear rack w/ mounting screws
Comunello CGS-347XL Cantilever Track End WheelGD# COM-cgs-347xl MFR# CGS-347XL• End wheel for UL325 compliance
FAAC 428089LED.1 Barrier Arm - Aluminum - Rectangular / 9' 3" w/ LEDsGD# FAC-428089LED.1 MFR# 428089LED.1• Lane Opening Width of 8 Ft. 9 In.
FAAC 428088LED.1 Barrier Arm - Aluminum - Rectangular / 7' 7" w/ LEDsGD# FAC-428088LED.1 MFR# 428088LED.1• Lane Opening Width of 7 Ft. 1 In.
FAAC 428090LED.1 Barrier Arm - Aluminum - Rectangular - / 12' 6" w/ LEDsGD# FAC-428090LED.1 MFR# 428090LED.1• Lane Opening Width of 12 Ft.
FAAC 787831 ReceiverGD# FAC-787831 MFR# 787831• Receiver XF 433Mhz
FAAC 390184 Barrier Arm Light Connection KitGD# FAC-390184 MFR# 390184• For B614 Barrier Arms
FAAC 410032 B614 Integrated Flashing Traffic LightGD# FAC-410032 MFR# 410032• Integrated Flashing Light on Barrier Cover
EMX 5416-2 RAVEN-REMOTE Programming Remote - Raven SensorGD# EMX-5416-2 MFR# EMX-5416-2• Programming remote for Raven Sensor See More Details$52.75
MMTC MAGLOCK Magnetic Lock - 1200 LbsGD# MTC-maglock MFR# MAGLOCK• Magnetic Lock that Holds 1200 lbs
MMTC KEY-BLANK Key BlankGD# MTC-key-blank MFR# KEY-BLANKChoose Mortise, 3BXL/PBTL-3, or 3BXLT See More Details$8.50
MMTC CUT-KEY Duplicate KeysGD# MTC-cut-key MFR# CUT-KEYAvailable in Mortise, K-Series, and Z-Series See More Details$15.00
