Diablo Controls DML-9LP Mini-Loop Probe Kit

Detector operates on any voltage from 10 to 30 volts AC or DC and draws about 1 milliamp of current with no vehicle over the sensor This detector only uses Diablo Controls' mini loop. This micro sized detector has no user settings and will automatically configure itself when powered up The DML 9LP can only operate in the pulse mode, presence is not possible.

• Results in the opportunity for greatly increased service life due to the reduced exposure to hazards such as road traffic, pavement movement, pavement deterioration, and roadwork
• The fact that the "Mini-Loop" is not installed in the pavement and that the lead-in is very durable allows the "Mini-Loop" to be used in situations such as cobblestone pavements, poor pavements, dirt/gravel roads, and bridge decks
• Minimal intrusion into good pavements!
• Veteran Owned & Operated