All Products
-
Diablo Controls DML-9LP Mini-Loop Probe KitGD# DBL-dml-9lp-bundleChoose 75', 100' or 350' Lead
• DML-9LP Detector and Mini-Loop Probe
• 10 to 30 volts AC or DC
• Designed for solar applications
• Fail-secure operation
• 5yr Manufacturer Warranty
See More DetailsDetailsFrom $193.95
To $1,054.85
-
DuraGate Arch Top Driveway Gate - Dual / Accepts Wood Infill - 16' W x 5' HGD# DGT-16-adw-bundle• 5' High on Ends - 6' High in Center x 16' Wide
• Hot Dip Galvanized Steel
• Black Powder Coat Finish
• Screw-In Cross Bar Holds Wood Fill
• Wood Fill Not Included See More DetailsDetailsFrom $1,400.00
To $2,327.00
-
Eagle 100 Residential Swing Gate OperatorGD# EGL-100-bundle• 18' x 600 Lbs
• 115VAC Power Source / 115VAC Operating Voltage
• Opens 90° ~ 18 Seconds
• Continuous Duty
• Includes Photo Eye & Receiver
• Order 2 Operators for Dual Gates
• 5-Year Limited Residential Manufacturer Warranty
• MADE IN USA See More DetailsDetailsFrom $1,675.00
To $1,878.45
-
Nice HySecurity MX4560 Chain - #40 / Dacroclad 30'GD# HYS-mx4560 MFR# MX4560• #40 Chain
• 30'
• Corrosion resistant Dacroclad
• With two steel mounting brackets and hardware
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$381.50 -
Nice HySecurity MX3903 Slow Speed Drive KitGD# HYS-mx3903 MFR# MX3903• Slow SwingSmart DC operator down to 15-22 seconds to open/close
• Improve gate function on large/heavy gates or gates that encounter more wind resistance
• Kit includes pulley and belt
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$325.25 -
Nice HySecurity MX4347 I/O Expansion ModuleGD# HYS-mx4347 MFR# MX4347• Expansion board module
• Provides 8 additional programmable relays and inputs
• For SmartCNX operators
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$711.00 -
Nice HySecurity MX4366 Rodent Barrier KitGD# HYS-mx4366 MFR# MX4366• Aluminum rodent block plate for SlideSmart DC 10F, 15 models
• Helps keep rodents out of the operator chassis and electronics
• Kit includes plate, Loctite and installation instructions
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$76.50 -
Nice HySecurity MX4397 SlideSmart HD Heater Kit - 115VGD# HYS-mx4397 MFR# MX4397• 115V heater kit for SlideSmart HD models
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$312.50 -
Nice HySecurity MX4410 I/O Expansion Module KitGD# HYS-mx4410 MFR# MX4410• Expansion board module
• Provides 8 additional programmable relays and inputs
• Includes bracket, hardware and communication cable MX4330
• For Smart CNX operators
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$1,315.00 -
Nice HySecurity MX4423 SlideSmart HD Heater Kit - 230VGD# HYS-mx4423 MFR# MX4423• 230V heater kit for SlideSmart HD models
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$439.25 -
Nice HySecurity MX4489 Base Extension & Retrofit Adapter - SlideSmart HDGD# HYS-mx4489 MFR# MX4489• Base extension for SlideSmart HD25, HD30
• Raises operator 14 inches off foundation
• Hot-dip galvanized finish
• Includes retrofit adapter for other post mount operators: 24" inside / 26" outside spacing
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$589.00 -
Nice HySecurity MX4566 CNX Post Mount KitGD# HYS-mx4566 MFR# MX4566• Post mount kit
• Includes bracket, fasteners, and Ubolt for 4 inch pipe
• SlideSmart or SwingSmart CNX models
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$442.75 -
Nice HySecurity SM-5-A3 Articulating Gate ArmGD# HYS-sm-5-a3 MFR# SM-5-A3• Articulating gate arm for applications involving uneven grade
• For left or right handing gates
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$131.00 -
Nice HySecurity MX4402 Kill Switch KitGD# HYS-mx4402 MFR# MX4402• Kill switch sensor
• For StrongArmPark DC | StrongArm 14F
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$32.00 -
Nice HySecurity MX3930 Taper Clamp AssemblyGD# HYS-mx3930 MFR# MX3930• Taper clamp assembly
• Includes male and female hubs plus all tightening hardware
• SwingSmart CNX
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$167.75 -
Nice HySecurity MX4004 Bracket - Sensor MountingGD# HYS-mx4004 MFR# MX4004• Plastic bracket for sensor mounting and position adjustment
• SwingSmart CNX, (includes 1 set of 2)
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$26.75 -
Nice HySecurity MX4005 Gate Arm AssemblyGD# HYS-mx4005 MFR# MX4005• Next Gen universal gate arm assembly
• Elliptical arms, no pinch covers required
• For left and right handing Swing gates
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$275.00 -
Nice HySecurity MX4265 MagnetGD# HYS-mx4265 MFR# MX4265• Plastic and magnet used to trip Open & Close sensors
• Mounts to taper clamp hub
• SwingSmart CNX 20
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$46.00 -
Nice HySecurity MX4280 Idler AssemblyGD# HYS-mx4280 MFR# MX4280• Idler assembly
• Includes plastic, bearing, and mounting bolt
• SlideSmart CNX models
• 2 per operator
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$50.00 -
Nice HySecurity MX4306 Cover KitGD# HYS-mx4306 MFR# MX4306• SlideSmart HD cover kit
• Includes cover, lock, and labels
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$484.00 -
Nice HySecurity MX4308 Motor Plate AssemblyGD# HYS-mx4308 MFR# MX4308• PEM motor plate assembly for SlideSmart DC HD
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$47.00 -
Nice HySecurity MX4312 U-Bolt Spacer PlateGD# HYS-mx4312 MFR# MX4312• The U-bolt spacer plate provides necessary reinforcement for post mounting u-bolts
• Also necessary for water resistance
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$18.50 -
Nice HySecurity MX4329-01 Hall Effect Sensor w/ Short HarnessGD# HYS-mx4329-01 MFR# MX4329-01• Hall effect sensor with short harness
• For SlideSmart CNX
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$42.00 -
Nice HySecurity MX4329-02 Hall Effect Sensor w/ Long HarnessGD# HYS-mx4329-02 MFR# MX4329-02• Hall effect sensor with long harness
• For SlideSmart CNX
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$50.00 -
Nice HySecurity MX4329-03 Hall Effect Sensor w/ HarnessGD# HYS-mx4329-03 MFR# MX4329-03• Hall effect sensor with harness
• For SwingSmart CNX
• 3-4 Week Lead Time
• No Additional Tariff Fees See More Details$61.00













