Choose Trigger only or Kit
• Fully waterproof housing
• Power options are 12-24VDC input or optional 3V CR2045 battery
• Input is protected via an optoisolator
• Grommet will take a wire diameter of 4.4mm to 6mm
• Range up to 100 yards
• Frequency: 433.39 MHz
• Installation bracket included
• Kit comes with ETrans50 Transceiver
• RESTOCK FEE APPLIES
The e-trigger is an ideal solution to eliminate wiring to gate motors and doors and will save many hours digging trenches across driveways. For example, you no longer need to wire an intercom (or another 3rd party device) directly into a gate motor. This unit connects to a wireless transceiver housed and connected to the gate motor.When the gates have been triggered, the e-Trigger device creates a wireless bridge to the transceiver on the gate motor, activating the relay and opening the gates/door.
@ Copyright 2021 Gate Depot @ Martrano Enterprises, LLC All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot
