Swing Arm Operators
Swing Arm Operators are an Excellent Choice for any install where durability and speed are important. This style of operator can open a large swinging gate in 12-15 seconds depending on length and weight and will usually come with a 5 to 10 year warranty. We carry models from Platinum Access Systems, Linear, Ramset, Doorking, All-O-Matic, Eagle, Liftmaster, Viking Access, Nice HySecurity, FAAC, and Nice Apollo. The newer models will typically use a 24VDC motor with a set of batteries to provide backup power in case of power outage. Older style units run using a 110VAC Motor with a capacitor and have very limited battery backup options. Most models require a concrete pad to be poured that is approximately 2'x2'x2' and finishing 4-6" above grade. The exception to that rule would be a bottom mounted swing arm operator like the DoorKing 6100. These units have the option to be mounted to a set of posts and the output shaft for the swing arm comes from the bottom of the operator to allow a more aesthetically pleasing installation. Cutting and welding of the swing arm will be required on all swing arm operators. If you need help picking the right model for your install give us a call at (888) 818-4283.
-
DoorKing 6300 Swing Gate Operator - 1 HPGD# DKS-6300-1-hp-bundle• 22' x 800 Lbs
• 115/208/230/460/575VAC Power Source
• 115VAC Operating Voltage
• Opens 90° ~ 16 - 18 Seconds
• Continuous Duty - 60 Cycles per Hour
• 5-Year Limited Manufacturer Warranty
• Additional Entrapment Prevention Devices REQUIRED
• MADE IN USA
• All Products Require a 3-5 Day Lead Time See More DetailsFrom $2,539.00
To $8,017.00
-
DoorKing 6500 Swing Gate Operator - 1 HPGD# DKS-6500-1-hp-bundle• 22' x 800 Lbs
• 115/208/230/460/575VAC Power Source
• 115VAC Operating Voltage
• Opens 90° ~ 16 Seconds
• Continuous Duty - 60 Cycles per Hour
• 5-Year Limited Manufacturer Warranty
• Additional Entrapment Prevention Devices REQUIRED
• MADE IN USA
• All Products Require a 3-5 Day Lead Time See More DetailsFrom $3,184.00
To $8,050.00