Pipe Track & Cantilever Gate Hardware
Cantilever Hardware is Typically Used For Chainlink Gates or in snowy areas where a gate running on a track may be obstructed. A chainlink gate will have a rolling gate wheel placed at the front to provide support when in the closed position, with a set of 4 pipe track wheels at the back end of the gate to keep the gate in line and provide support when in the open position. If you are building a heavier custom steel gate you will want to look at the Communelo Cantilever Gate Hardware distributed through Architectural Iron Design under the brand name Duragates. This system uses a "C" shaped cantilever track welded to the bottom of your gate with a set of 2 carriages that support the full weight of the gate when it is full extended in either direction. At the top of the gate you have a set of guide rollers holding the gate vertical in a similar fashion as a v-track style gate. They also sell a variety of catchers and support cups for either end of the gate. Because of the wide variety of weight and length possibilities on a custom gate it is important to properly engineer the foundation and the gate itself to support the final weight. Make sure to speak to an engineer.
-
Comunello CGI-05P Foundation PlateGD# COM-cgi-05p MFR# CGI-05P• Recommended for mounting carriage
• Prevents carriage from coming into direct contact with the ground
• Provides for a sturdier base and a more finished look
• For CGI-350.5P
• There is a 20% Restock Fee on all products See More Details$97.00 -
Comunello CGI-346P Cantilever Track Bottom End CupGD# COM-cgi-346p MFR# CGI-346P• Bottom end cup
• Holds gate steady
• Prolongs life of carriages and gate operators
• For CGI-350.5P
• There is a 20% Restock Fee on all products See More Details$169.00 -
Comunello 258-30 Double Guide RollerGD# COM-258-30 MFR# 258-30• Double guide roller
• For use w/ 1-1/2" guide rail
• Mounts on 3" - 4" post
• For arched top gates
• There is a 20% Restock Fee on all products See More Details$139.00 -
Comunello CGI-347P Cantilever Track End WheelGD# COM-cgi-347p MFR# CGI-347P• End wheel for UL325 compliance
• Bolts into each end of track
• Prevents dirt, snow, etc. from getting inside track
• For CGI-350.5P
• There is a 20% Restock Fee on all products See More Details$203.00 -
Comunello CGA-345M-9.84FT Cantilever Track - Aluminum / 3-1/4" x 9' 10"GD# COM-cga-345m-9.84ft MFR# CGA-345M-9.84FT• 3-1/4" x 3-1/8" x 9' 10"
• Aluminum Track
• Bottom Track For CGA-350.5M Carriage
• There is a 20% Restock Fee on all products See More Details$370.00 -
Comunello CGA-345M-19.86F Cantilever Track - Aluminum / 3-1/4" x 19' 8"GD# COM-cga-345m-19.86f MFR# CGA-345M-19.86F• 3-1/4" x 3-1/8" x 19' 8"
• Aluminum Track
• Bottom Track For CGA-350.5M Carriage
• There is a 20% Restock Fee on all products See More Details$616.00 -
Comunello CGI-345P-9.84FT Cantilever Track - Stainless Steel / 4" x 9' 10"GD# COM-cgi-345p-9.8ft MFR# CGI-345P-9.84FT• 4" x 3-1/2" x 9' 10"
• Stainless Steel Track
• Bottom Track For CGI-350.5P Carriage
• There is a 20% Restock Fee on all products See More Details$1,001.00 -
Comunello CGI-345P-19.68F Cantilever Track - Stainless Steel / 4" x 19' 8"GD# COM-cgi-345p-19.68f MFR# CGI-345P-19.68F• 4" x 3-1/2" x 19' 8"
• Stainless Steel Track
• Bottom Track For CGI-350.5P Carriage
• There is a 20% Restock Fee on all products See More Details$1,919.00 -
Comunello CGS-345XL-9.84F Cantilever Track - Raw Steel / 7-1/4" x 9' 10"GD# COM-cgs-345xl-9.84f MFR# CGS-345XL-9.84F• 7-1/4" x 6-1/2" x 9' 10"
• Raw Steel Track
• Bottom Track For CGS-350.5XL Carriage
• There is a 20% Restock Fee on all products See More Details$1,551.00 -
Comunello DuraGates CGS-350.5XL Extra Large Monobloc Carriage - Galvanized Steel / 7,700 LbsGD# COM-cgs-350.5xl MFR# CGS-350.5XL• 30' x 7,700 Lbs / 65' x 4,400 Lbs
• There is a 20% Restock Fee on all products See More Details$1,417.00 -
Comunello CGS-345M-19.68F Cantilever Track - Galvanized Steel / 2-3/4" x 19' 8"GD# COM-cgs-345m-19.68f MFR# CGS-345M-19.68F• 2-3/4" x 2-3/4" x 19' 8"
• Galvanized Steel Track
• Bottom Track For CGS-500.8M Carriage
• There is a 20% Restock Fee on all products See More Details$442.00 -
Comunello CGS-345M-9.84FT Cantilever Track - Galvanized Steel / 2-3/4" x 9' 10"GD# COM-cgs-345m-9.84ft MFR# CGS-345M-9.84FT• 2-3/4" x 2-3/4" x 9' 10"
• Galvanized Steel Track
• Bottom Track For CGS-500.8M Carriage
• There is a 20% Restock Fee on all products See More Details$252.00 -
Comunello RG-387-9.84FT U-Channel Guide - Galvanized Steel / 9' 10"GD# COM-rg-387-9.84ft MFR# RG-387-9.84FT• 1-1/4" x 9' 10"
• Galvanized steel U-channel
• For side mounted guide rollers
• For arched or decoratively topped gates
• There is a 20% Restock Fee on all products See More Details$77.00 -
Comunello CG-50M Gear Rack - SmallGD# COM-cg-50m MFR# CG-50M• 4' 11" gear rack w/ mounting screws
• 15mm x 15mm
• Mounts inside track
• Completely hides drive system
• No exposed hardware - complete protection
• For CGS-500.8M
• There is a 20% Restock Fee on all products See More Details$60.00 -
Comunello CGS-346XL Cantilever Track Bottom End CupGD# COM-cgs-346xl MFR# CGS-346XL• Bottom end cup
• Holds gate steady
• Prolongs life of carriages and gate operators
• For CGS-350.5XL
• There is a 20% Restock Fee on all products See More Details$88.00 -
Comunello CG-50P Gear Rack - MediumGD# COM-cg-50p MFR# CG-50P• 4' 11" gear rack w/ mounting screws
• 22mm x 225mm
• Mounts inside track
• Completely hides drive system
• No exposed hardware - complete protection
• For CGS-500.8P
• There is a 20% Restock Fee on all products See More Details$88.00 -
Comunello RG-387-19.68FT U-Channel Guide - Galvanized Steel / 19' 8"GD# COM-rg-387-19.68ft MFR# RG-387-19.68FT• 1-1/4" x 19' 8"
• Galvanized steel U-channel
• For side mounted guide rollers
• For arched or decoratively topped gates
• There is a 20% Restock Fee on all products See More Details$96.00 -
Comunello CG-50G Gear Rack - LargeGD# COM-cg-50g MFR# CG-50G• 4' 11" gear rack w/ mounting screws
• 30mm x 30mm
• Mounts inside track
• Completely hides drive system
• No exposed hardware - complete protection
• For CGS-500.8G
• There is a 20% Restock Fee on all products See More Details$131.00 -
Comunello CGS-347XL Cantilever Track End WheelGD# COM-cgs-347xl MFR# CGS-347XL• End wheel for UL325 compliance
• Bolts into each end of track
• Prevents dirt, snow, etc. from getting inside track
• For CGS-350.5XL
• There is a 20% Restock Fee on all products See More Details$158.00 -
Comunello CG-55M TemplateGD# COM-cg-55m MFR# CG-55M• Gear rack centering device
• Installation tool to center and align gear rack in track
• Aligns teeth and acts as drilling jig
• Set of 2 pieces
• For CGS-500.8M
• There is a 20% Restock Fee on all products See More Details$278.00 -
Comunello CG-55P TemplateGD# COM-cg-55p MFR# CG-55P• Gear rack centering device
• Installation tool to center and align gear rack in track
• Aligns teeth and acts as drilling jig
• Set of 2 pieces
• For CGS-500.8P
• There is a 20% Restock Fee on all products See More Details$301.00 -
Comunello CG-55G TemplateGD# COM-cg-55g MFR# CG-55G• Gear rack centering device
• Installation tool to center and align gear rack in track
• Aligns teeth and acts as drilling jig
• Set of 2 pieces
• For CGS-500.8G
• There is a 20% Restock Fee on all products See More Details$361.00 -
Comunello 247F Adjustable Guiding Plate - Up To 3" FrameGD# COM-247f MFR# 247F• For Frames Up To 3"
• Top Guide Assembly
• 2 Wheels, Galvanized
• There is a 20% Restock Fee on all products See More Details$33.00 -
Comunello 253-40 Nylon Side Roller - 10"GD# COM-253-40 MFR# 253-40• Nylon Support Roller - 10"
• Alternative to top guide
• There is a 20% Restock Fee on all products See More Details$88.00 -
Comunello 255-220-C Adjustable Guiding Plate - 2-3/8" FrameGD# COM-255-220-c MFR# 255-220-C• For frames up to 2-3/8"
• Top guide assembly
• 4 covered 1-1/4" rollers
• There is a 20% Restock Fee on all products See More Details$59.00