Swing Gates

SWING GATES are the easiest type of gate to install and are the most common type of gate used for residences and small-medium sized properties. Bi-Parting Swing Gates take up less driveway space than a single gate and are recommended for driveways over 18 Ft. wide. Typically, Swing Gates open inwards towards the property but if the driveway slopes or curves sharply, an outward opening gate is recommended. Please read the article regarding GATE SETBACKS for more information.

Some advantages of Bi-Parting Swing Gates are; they are less affected by wind and cause less stress on posts, hinges and gate operator motors (if automated). However, if automation is required, each gate leaf will need a gate operator and a trench will need to be dug across the driveway to house the electronic connection between the two operators,

Situations where a Swinging Gate could be used over a Sliding Gate are:

  • The driveway has no fence or wall for the sliding gate to "slide behind".
  • The driveway is very uneven.
  • If both a swing or a sliding gate are feasible, a swing gate is generally recommended as they are easier to install and maintain. 

 

Swing Gate Types - Single - Bi-Parting

Slide Gates

Slide Gates can be either Single or Bi-Parting and are more commonly used for commercial properties but are an excellent choice for residential applications if there are size limitations. A Bi-Parting Slide Gate is ideal if space is limited on the side of the driveway as you only need room for one leaf to slide open.

Another advantage is Slide Gates aren't effected by the wind like a swinging gate.

Situations where a Sliding Gate could be used over a Swing Gate are:

  • The driveway slopes up from the road and the gate is on the front edge.
  • The driveway length is limited and a swing gate will impede upon usable parking or space.
  • You want a solid privacy gate but live in a high-wind area.
  • The driveway is more than 18 ft. wide.

 

Slide Gate Types - Single - Bi-Parting

Swing Gates with Uphill (Rising) Hinges

If there is no room for a sliding gate to slide, the driveway slopes upwards from the road or if it is impractical to open outwards, then a Swing Gate with an Uphill Hinge may work. 

The disadvantage of using Uphill Hinges is the weight of the gate must be lifted when opening, which increases with the width of the gate and the how high it rises. 

 Uphill Hinge Swing Gate