Linear
Arm Operators |
For
IN swinging gates (as seen from inside property) with masonry columns,
installer must notch the columns in order for operator to swing
freely. |
 |
NEW
- Zareba Linear Arm Swing Gate Operators
•
14' x 450lbs. or 16' x 750lbs.
• Weatherproof case to protect
sensitive parts
• Temperature range from -30°F
• Soft start & stop for safety as well as motor protection
• Theft warning buzzer
• Stainless Steel shaft for
reliable operation & durability
• Direct drive system
for durability & quiet operation
• Solar compatible
• ETL listed & UL 325 compliant |
|
 |
Closeout
Sale - Rutland Linear Arm Swing Gate
Operators
• 16' x 500lbs. or 16' x 700lbs.
• Corrosion-proof control box
• Temperature range from -30°F
• Graduated soft start & stop
• Only 1 - 12-volt battery required
• Solar compatible
• ETL listed & UL 325 compliant |
|
 |
FAAC
400 Hydraulic Ram Arm for Single Gate.
• From 12 ft x 900 lbs. to 18 ft x 1500
lbs.
• Designed for situations needing maximum
versatility such as apartment, subdivision, commercial/industrial
and residential applications.
• Adjustable hydraulic pressures to control force
• Minimized pinch points
• Hydraulic locking of the gate available in open and/or closed
position
• Two year limited warranty |
|
 |
FAAC
402 and 422 Hydraulic Swing Gate Operator.
• 10 ft x 900 lbs.
• Designed for light duty gate systems & are
not recommended for solid gates.
• Adjustable hydraulic pressures to control swing
• Minimized pinch points
• Hydraulic locking of the gate available in opened and/or
closed position
• Quiet Operation
• Self lubricating for long life
|
|
|
FAAC
412 Electromechanical Swing Gate Operator.
• 14 ft. x 500 lbs.
• Ideal for light residential applications
• Mechanical locking in the opened and closed positions
• Easy interconnection of loop detectors, photocells, etc.
to reverse a gate if an obstacle is sensed
• Easy interconnection of actuating devices like remote control
radios, key pads and telephone entry systems
• On-board diagnostic LEDs
• Convenient manual release in case of power failure |
|
 |
FAAC
415 Electromechanical Swing Gate Operator
• 15 ft. x 500 lbs.
• Designed for Residential Use
•Two Year Limited Warranty
• Sleek design
• Operates even in case of power failure (with optional battery
back-up and subject to battery condition)
• Reverse on contact
• Slow down "soft stop" |
|
 |
Apollo
1500/1550ETL Single Linear Arm Gate Operator
• 16' wide x 600 lbs.
• 12 VDC Motor
• Standard (1500) or Soft Stop(1550)
• Inward or Outward swing
• Control Box Dimensions: H:18"
- L:8" - W:18"
• Shipping Weight 64-lbs.
• 2-year warranty |
1500 $850.00
1550 $960.00
|
 |
Apollo
1600/1650ETL Dual Linear Arm Gate Operator
• 16' wide x 600 lbs
• 12 VDC Motor
• Standard (1600) or Soft Stop(1650)
• Inward or Outward swing
• Control Box Dimensions: H:18"
- L:8" - W:18"
• Shipping weight: 100-lbs.
• 2-year warranty |
1600 $1595.00
1650 $1625.00
|
 |
Viking G-5™ Swing Gate Operator
• Max gate
capacity 700 lbs/16'
• Operating speed 16-18 seconds per
90° Duty cycle 100%
• Max Opening 90 °
•
Battery backup operation 400 full cycles (600 lbs. / 12' gate)
• Battery 7 amp hr 12 VDC x 2. Operational voltage 24 VDC
• Main power source 120 / 220 VAC. UL 325 and UL 991 Listed
• Can be used in solar installations - 40 Watts @ 24VDC
• SIngle Gate - Shipping weight: 55-lbs.
• Dual Gate
- Shipping weight: 70-lbs. |
Single - $1288.00
Dual - $2255.00
|
 |
DoorKing
6002 Ram Arm.
• 14' wide x 400 lbs residential gates.
• 115VAC converted to 24VDC
• Fail Secure with keyed release for manual operation
• Shipping Weight: 25-lbs.
• Batteries included
• 2-year warranty |
|
|
Elite
Miracle One Ram Arm Single Swing Gate Operator.
• 15' wide x 600 lbs.
• 12 VDC with Built in Battery Backup.
• Can operate off low voltage transformer or solar panel.
• Has slow down feature so gates do not close hard or shudder
• Includes Liftmaster 355 Receiver
• Shipping Weight: 69 lbs.
• Two Years Limited Warranty
Note: This
unit can be difficult to adjust, all tech support will be refered
to Chamberlain. |
|
Elite
Miracle One Ram Arm Dual Swing Gate Operator.
• 15' wide x 600 lbs.
• 12 VDC with Built in Battery Backup.
• Can operate off low voltage transformer or solar panel.
• Has slow down feature so gates do
not close hard or shudder
• Includes Liftmaster
355 Receiver
• Shipping Weight: 69 lbs.
• Two Years Limited Warranty
Note:
This unit can be difficult to adjust, all tech support will be
refered to Chamberlain.
|
$1739.00
|
 |
Clearance
Only A Few Left
Reduced To Less Than 1/2 Of Listed Price.
SEA gate operators are almost
identical to FAAC units.
• The company has offices and a service center in the USA.
• Available in 110VAC Some units available in 220VAC.
• This is the best deal you will find for an operator of this
high caliber.
• We purchased these from a gate supply company that was going
out of business. Their loss is your gain.
SEA Libra Mini Tank Hydraulic Ram Arm (DuraGate
210)
Gates up to 10' & 440 Lbs
SEA Libra Half Tank Hydraulic Ram Arm (DuraGate
310)
Gates up to 11.5' & 660 Lbs
SEA Libra Full Tank Hydraulic Ram Arm DuraGate
410)
Gates up to 23' & 880 Lbs.
DuraGate 210-CL single has hydraulic lock in closed
position only use with gates that open inward only. Not recommended
for gates that have solid fill. 110V
DuraGate 310-OL single has
lock in open position an electric lock must be used and is
supplied 230V
DuraGate 410-OL Single has
lock in open position an electric lock must be used and is
supplied This is the extended version 15.5" piston and can
handle gates up to 2000lbs. 110V
SEA Internal Stop Kit |
Mini Tank
Half Tank
Full Tank
Electric Lock
DG210 - $498.00
DG310 - $650.00
DG410 - $1300.00
Stop Kit - $105.00 Call To Order |
| |
|
|
 |
|
|
|
