|
|
Deluxe Powder Coated Steel Gates Built To Last A Lifetime
New Flat Rate Shipping in California $300, $500 continental US
All designs come as swing gates. All designs can be converted to slide gates by adding wheels
|
|
Photo
|
Gate Model & Descriptions
|
|
Spartan Series 3 Designs Available
|
Color: Powder Coat Bronze Color
Outer frame is 1 1/2"x1 1/2" with 3/4"x3/4 Stakes
Available sizes:
12' wide single
12' wide bi-parting
14' wide single
14' wide bi-parting
16' wide bi-parting
|
|
Classic Series 5 Designs Available
|
Color: Powder Coat Black Color
Built to the highest standards. These are straight forward minimalist designs
Outer frame is 2"x2" with 1"x1 Stakes and 6" high recessed panel
Available sizes:
12' wide single, 12' bi-parting
14' wide single, 14' bi-parting
Flat Tops available In 16' double
|
|
Guardian Series 5 Designs Available
|
Color: Powder Coat Black Color
Delicate but strong
Outer frame is 1 1/2"x1 1/2" with 3/4"x3/4 Stakes. Entire gate is made of cold rolled steel and is as strong as our larger framed gates. These gates feature powder coat with galvanized under coat and are very impervious to salt spray making them suitable for ocean areas.
Available sizes:
12' wide single, 12' bi-parting
14' wide single, 14' bi-parting
|
|
Elegant Series 5 Designs Available
|
Color: Powder Coat Finish
Old world handcrafting coupled with fine art design. Grape, Rose, Olive,
and Birdcage Motif
Outer frame is 2"x2" with 1"x1 Stakes. These gates features collars on the stakes and 4 of the designs have hand forged elements.
Available sizes:
12' wide single, 12' bi-parting
14' wide single, 14' bi-parting
|
|
|
Important Information - Please Read:
All designs come as swing gates. All designs can be converted to slide gates by adding wheels.
We are now producing a line of our finest steel gates for sale nationwide. The designs and material specifications are top end high quality. Our firm has a reputation for creating some of the finest gates in the world. Until now they have been priced out of reach for many people. Please have a look at the specifications for these gates and you will see the detail and quality that has become our benchmark.
Gates weigh 350 - 500 lbs. and feature German "Interpon" powder coat finish done in a factory certified facility. Most gates have galvanized undercoat. All scrolls have hot forged splayed and textured ends. All artwork is three dimensional. Vines are hand textured and tapered. All artwork is hand painted over the powder coat finish.
PLEASE READ THIS IMPORTANT GATE MEASUREMENTS NOTE BEFORE PURCHSING YOUR GATE:
•Bi-Parting gates may vary in size from one leaf to the other by up to 1/4"
•Single gates purchased two at a time to be installed as one bi-parting gate usually will not match in height and may vary from one another by up to 1"
•Before installing your posts in concrete be sure to measure your single or bi-parting gate first to ensure it is square. Measure first from corner to corner and then each end from top to bottom. They should not be off by more than 1/4" to 1/2"
Rust Disclaimer for all of our steel gates, including those with zinc galvanizing under the powder coat:
Some rust weeping from joints is a normal occurrence as the powder coat cannot reach all the hidden joints. After it rains rust may "weep" down from crevices between connecting bands or collars.
For Prevention: Seal the top of each joint with a black silicon sealant
|
Steel Gate Accessories & Hardware
|
|
|
|
|
|
|
|
|
|
|