|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Loops & Loop Detectors
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
New Product:
|
BD
EL24-60 Prefab 4'x8' Direct Burial Loop • 4' x 8' • Flexible • 60' lead Loop • Direct Burial |
 $115.00 |
|
| BD
EL24-50 Prefab 4'x8' Direct Burial Loop • 4' x 8' • Flexible • 50' lead Loop • Saw Cut |
$100.00 |
||
 |
EMX Lite Preformed Loop • Lightweight preformed loop. • For use with all EMX's loop detectors. • Overall diameter of 0.26 inches suitable for saw cut, tar & concrete installation. • Comes standard with 50 feet of twisted and jacketed lead-in wire. • 2 Year limited Warranty |
|
|
 |
AGW
PerForm Preformed Loop Low Temperature • Ideal for direct burial on earth & gravel roads or under concrete & asphalt • Comes standard with 50 feet of twisted and jacketed lead-in wire. |
4'x6' - $113.40 4'x8' - $124.20 4'x10' - $135.00 |
|
 |
Reno
A&E Pre-formed Loop High Temperature. • Designed to be placed on road base before hot asphalt is applied. • 4'x6' Direct Burial Loop Special order item - subject to availability. • 4'x8' Direct Burial Loop Stock item • 4'x10' Direct Burial Loop Special order item - subject to availability. • 15 Day Lead Time for Special Order Items |
4'x6' - $295.00 4'x8' - $255.00 4'x10' - $295.00 |
|
 |
Driveway
Loop Cut-In Kit • This kit is for a loop installation in asphalt or concrete driveway. • You will need a circular saw with a masonry blade and calking gun. • The kit does not include twisted pair wire to connect to operator. • See below for lead wire. |
4' X 6' - $75.00 4' X 8' - $85.00 4' X 10' - $100.00 |
|
 |
Belden
High Quality Wire. • For uncompromising gate installations use only the best wire • Many installations go bad due to low quality wire • Almost all conduit fills with water. • The wire has to withstand this environment. Belden 8444 4 conductor 22 gauge (4/22) 50 foot roll. Belden 8444 4 conductor 22 gauge (4/22) 100 foot roll. (use for low voltage control, photo eyes, keypads) Belden 8461 1 pair twisted 18 gauge 50 foot roll. Belden 8461 1 pair twisted 18 gauge 100 foot roll. (Use for lead to loops and transformer lead) |
8444/50' - $18.00 8444/100' - $36.00 8461/50' - $14.00 8461/100' - $28.00 |
|
   |
Low
Voltage Wire By The Foot Belden 8444 4 conductor 22 gauge (4/22) Per Foot (use for low voltage control, photo eyes, keypads) Belden 8461 1 pair twisted 18 gauge Per Foot (Use for lead to loops and transformer lead) Cat 5 Wire Outdoor Direct Burial/UV Resistant Per Foot Loop Wire 20 gauge. (aircraft grade) Per Foot |
8444 - $0.36 8461 - $0.28 Cat 5 - $0.36 20 Gauge - $0.42 |
|
  |
Q-SEAL
290S Loop Sealant • 30 oz. tube, for use with asphalt (black) or concrete ( grey) driveways. • Q-SEAL 290S Detector Loop Sealant is a one component thixotropic moisture curing polyurethane sealant, for use in both asphalt and concrete pavement to provide a weather and chemical resistant waterproof seal. • One tube will cover two 4-ft x 6-ft loop cuts. |
Caulk - $27.50 Caulking Gun - $14.00 |
|
Probe Style Exit Wands
 |
EMX
CarSense 101 Driveway Sensor. CS 101
Module 12VAC |
50' lead wire - $225.00 100' lead wire - $265.00 Module - $160.00 |
|
 |
EMX
CarSense 202 Driveway Sensor. Probe Style Loop Detector Self Contained. • 9- 35 Volt AC/DC 10 MA Standby current. • Great for solar powered gates. CS 202-50 With 50' length probe CS 202-100 With 100' length probe |
50' lead wire - $149.00 100' lead wire - $198.00 |
|
Loop Detectors & Accessories
Note: Be sure to set Loop Detectors to different frequencies when using more than one, ie: safety loops and exit loop.
 |
Viking Loop Detector Rack • Holds 3 EMX Ultra DTek plug-in loop detectors. • Saves time on installation • Comes standard on Viking Commerial rated operators |
$50.00
|
|
 |
EMX Ultra D-TEK
Plug in Style Vehicle Loop Detector • Plug-In Compatilble with Elite's OmniControl Board Operators (SL3000 & CSW200) • 10 Sensitivity Settings and 4 Frequency Settings • Loop Diagnostics • Lightning and Surge Protection • Frequency Counter |
$113.75 |
|
 |
EMX MVP D-TEK D-Tek
Vehicle Loop Detector • 9VDC to 240VAC • Allows for easy installation into small operator housings. • Compatible with 11 pin mountable socket or wire harness. • Temperature range: -40F to 180F. • 2 Year limited Warranty |
$109.50 |
|
 |
EMX LP D-TEK D-Tek
Vehicle Loop Detector • 12 to 24jVAC/DC • 9mA current draw • Compatible with 11 pin mountable socket or wire harness. • Temperature range: -40F to 180F. • 2 Year limited Warranty |
$109.50 |
|
 |
EMX HAR-11 Loop Detector
Harness • for use with EMX D-Tek Vehicle Loop Detector • 11 pin socket with 3 feet of wire |
$9.95
|
|
 |
EMX
LD-11 Mountable Loop Detector Socket Base • for use with EMX D-Tek Vehicle Loop Detector • 11 pin screw mount socket |
$9.95
|
|
 |
Reno
A&E Loop Detector. • We feel is one of the best detectors available. • Use the Reno A&E BX-LP (low power) for solar and battery gate operators. BXC-3 110 volt AC BXC-4 12-24 volt AC/DC BXC-LP 12 volt DC low power for solar gates |
BXC-3 - $115.00 BXC-4 - $115.00 BXC-LP - $125.00 |
|
 |
Reno
A&E 11-Pin Screw Mount Terminal • for Reno Loop Detector above. |
$12.00
|
|
 |
Reno
A&E 802-4 Wire Harness with 11-pin Socket for Reno Loop Detector.
• Harness has three feet of wire. • Loop detector install is very fast with this socket. |
$12.00
|
|
 |
Elite
A-ELD Plug In Loop Detectors. |
$128.00 |
|
 |
Doorking
9410 Single Channel Loop Detector. |
$150.00 |
|
© Copyright 2002-2008 by Gate Depot® All rights reserved. No part of this site can be reproduced in any form or by any means, mechanical or electronic, without the prior written consent of Gate Depot®